Omni_wizard.db/zen_create_json_final.txt

DELIMITER //

CREATE OR REPLACE PROCEDURE zen_create_json_final(
  IN p_uuid VARCHAR(100),
  IN p_FunctionTag VARCHAR(100),
  IN p_code_id VARCHAR(100),  -- Wizard Template Id
  IN p_is_extend VARCHAR(100),
  IN p_pk VARCHAR(100),
  IN p_is_bpm VARCHAR(1),
  IN p_FunctionTag_org VARCHAR(100)
)
/*
  功能   : 最後步驟, 將之前所有寫入暫存表的變數, 寫入 source
  描述: 一次性的 update 到 @temp_code, 並寫入 json db
  建立日期 : 2023/12/22
  
  修改歷史
    項目 誰         日期       修改說明
    ==== ========== ========== ================================================
    1    Michael    2023/12/22 根據 v1.0 重構
    2    Michael    2024/03/06 擴充 json4 及 json5 2個欄位
*/
BEGIN
  DECLARE v_temp_code MEDIUMTEXT;
  DECLARE v_temp_code6 MEDIUMTEXT;
  -- 跟 fields define 相關的部分要專門處理(核心程式)
  DECLARE v_code_insert MEDIUMTEXT;
  DECLARE v_code_update MEDIUMTEXT;
  DECLARE v_code_view MEDIUMTEXT;
  DECLARE v_code_gridview MEDIUMTEXT;
  DECLARE v_code_quickedit MEDIUMTEXT;
  
  DECLARE v_json_bh VARCHAR(600);
  DECLARE v_json_gh VARCHAR(600);
  DECLARE v_json_insert MEDIUMTEXT;
  DECLARE v_json_update MEDIUMTEXT;
  DECLARE v_json_quickedit MEDIUMTEXT;
  DECLARE v_json_gridview MEDIUMTEXT;
  DECLARE v_json_view MEDIUMTEXT;
  DECLARE v_json_gf VARCHAR(600);
  DECLARE v_json_bf VARCHAR(600);
  DECLARE v_crlf VARCHAR(2);
  DECLARE v_sep VARCHAR(1);
  DECLARE v_FieldDS VARCHAR(1);
  DECLARE v_FieldSH VARCHAR(1);
  
  DECLARE v_ip VARCHAR(100);
  DECLARE v_db VARCHAR(100);
  DECLARE v_tmp1 VARCHAR(100);
  
  DECLARE v_imax INT;
  DECLARE v_imin INT;
  DECLARE v_inow INT;
  DECLARE v_pos INT;
  
  DECLARE v_zen_key VARCHAR(100);
  DECLARE v_zen_value MEDIUMTEXT;
  
  SET v_crlf = CONCAT(CHAR(13), CHAR(10));
  SET v_ip = '${ls:base_ip}';
  SET v_db = '${ls:base_db}';
  
  -- Single 類使用相同的樣板, SingleGrid 除外
  IF p_code_id IN ('SingleEntry','SingleTabs','SinglePanels') THEN
    SELECT code_content INTO v_temp_code FROM zen_Wizard_template WHERE code_id = 'SingleEntry';
  -- Master-detail(支援 Tab 和 Panel 2種 UX -- 配合 Single Extend)
  ELSEIF p_code_id IN ('MasterDetailTabs','MasterDetailPanels') THEN
    SELECT code_content INTO v_temp_code FROM zen_Wizard_template WHERE code_id = 'MasterDetail';
  ELSE
    SELECT code_content INTO v_temp_code FROM zen_Wizard_template WHERE code_id = p_code_id;
  END IF;

  -- 如果是擴充表單, 要手動調整 ${ls:query_id} 的相關內容(較特殊的變數, 暫時仍手動處理)
  IF p_is_extend = 'Y' THEN
    SET v_tmp1 = p_pk;
    SET v_pos = LOCATE(',',p_pk);
    IF v_pos > 0 THEN 
      SET v_tmp1 = SUBSTRING(p_pk,1,v_pos-1);
    END IF;
    SET v_temp_code = REPLACE(v_temp_code,'${ls:query_id}',CONCAT('^',v_tmp1,'^${ls:query_id}'));
  END IF;
  
  /*
    加入 bpm 表單開始簽核後, 不得編輯的語法, 要記得 template 要先加入 @bpm_edit@
  */
  IF p_is_bpm = 'Y' THEN
    -- "disabledOn": "${ls:hrsm12@update == null || flow_status != 'N'}", 高手的解答
    SET v_temp_code = REPLACE(v_temp_code,'@bpm_edit@', CONCAT(' || flow_status != ',CHAR(39),'N',CHAR(39),'}'));
  ELSE
    SET v_temp_code = REPLACE(v_temp_code,'@bpm_edit@', '}');
  END IF;
  
  /*
    將 zen_wizard_tmp 的變數 replace
    loop 取得所有的變數, 然後 update v_temp_code
  */
  SELECT MAX(rowid) INTO v_imax FROM zen_wizard_tmp WHERE uuid = p_uuid;
  SELECT MIN(rowid) INTO v_imin FROM zen_wizard_tmp WHERE uuid = p_uuid;
  
  WHILE v_imin <= v_imax DO
    SELECT zen_key, IFNULL(zen_value,'') INTO v_zen_key, v_zen_value 
    FROM zen_wizard_tmp WHERE uuid = p_uuid AND rowid = v_imin;
    
    SET v_temp_code = REPLACE(v_temp_code,CONCAT('@',v_zen_key,'@'),v_zen_value);

    SELECT MIN(rowid) INTO v_imin FROM zen_wizard_tmp WHERE uuid = p_uuid AND rowid > v_imin;
  END WHILE;
  
  /*
    將 zen_wizard_jsondata 相關的欄位定義組好並更新相關變數
  */
  SET v_code_insert = '';
  SET v_code_update = '';
  SET v_code_view = '';
  SET v_code_gridview = '';
  SET v_code_quickedit = '';
    
  -- FieldSH = 'Y' 的處理
  SELECT MAX(rowid) INTO v_imax FROM zen_wizard_jsondata WHERE uuid = p_uuid AND FieldSH = 'Y';
  SELECT MIN(rowid) INTO v_imin FROM zen_wizard_jsondata WHERE uuid = p_uuid AND FieldSH = 'Y';
  
  WHILE v_imin <= v_imax DO
    SELECT 
      IFNULL(json_bh,''), IFNULL(json_gh,''), FieldSH,
      IFNULL(json_insert,''), IFNULL(json_update,''), IFNULL(json_quickedit,''),
      IFNULL(json_gridview,''), IFNULL(json_view,''),
      IFNULL(json_gf,''), IFNULL(json_bf,'')
    INTO 
      v_json_bh, v_json_gh, v_FieldSH,
      v_json_insert, v_json_update, v_json_quickedit,
      v_json_gridview, v_json_view,
      v_json_gf, v_json_bf
    FROM zen_wizard_jsondata WHERE uuid = p_uuid AND rowid = v_imin;
    
    IF v_FieldSH = 'Y' THEN
      IF (v_imin = v_imax) THEN 
        SET v_sep = ''; 
      ELSE 
        SET v_sep = ','; 
      END IF;
    
      IF v_json_insert <> '' THEN 
        SET v_code_insert = CONCAT(v_code_insert, v_json_bh, v_json_gh, v_json_insert, v_json_gf, v_json_bf, v_sep, v_crlf);
      END IF;
      
      IF v_json_update <> '' THEN 
        SET v_code_update = CONCAT(v_code_update, v_json_bh, v_json_gh, v_json_update, v_json_gf, v_json_bf, v_sep, v_crlf);
      END IF;
      
      IF v_json_view <> '' THEN 
        SET v_code_view = CONCAT(v_code_view, v_json_bh, v_json_gh, v_json_view, v_json_gf, v_json_bf, v_sep, v_crlf);
      END IF;
    END IF;
    
    SELECT MIN(rowid) INTO v_imin FROM zen_wizard_jsondata WHERE uuid = p_uuid AND rowid > v_imin;
  END WHILE;
  
  -- FieldDS = 'Y' 的處理
  SELECT MAX(rowid) INTO v_imax FROM zen_wizard_jsondata WHERE uuid = p_uuid AND FieldDS = 'Y';
  SELECT MIN(rowid) INTO v_imin FROM zen_wizard_jsondata WHERE uuid = p_uuid AND FieldDS = 'Y';
  
  WHILE v_imin <= v_imax DO
    SELECT 
      IFNULL(json_bh,''), IFNULL(json_gh,''), FieldDS,
      IFNULL(json_insert,''), IFNULL(json_update,''), IFNULL(json_quickedit,''),
      IFNULL(json_gridview,''), IFNULL(json_view,''),
      IFNULL(json_gf,''), IFNULL(json_bf,'')
    INTO 
      v_json_bh, v_json_gh, v_FieldDS,
      v_json_insert, v_json_update, v_json_quickedit,
      v_json_gridview, v_json_view,
      v_json_gf, v_json_bf
    FROM zen_wizard_jsondata WHERE uuid = p_uuid AND rowid = v_imin;
    
    IF v_FieldDS = 'Y' THEN
      IF (v_imin = v_imax) THEN 
        SET v_sep = ''; 
      ELSE 
        SET v_sep = ','; 
      END IF;
        
      IF v_json_gridview <> '' THEN 
        SET v_code_gridview = CONCAT(v_code_gridview, v_json_gridview, v_sep, v_crlf);
      END IF;
      
      IF v_json_quickedit <> '' THEN 
        SET v_code_quickedit = CONCAT(v_code_quickedit, v_json_quickedit, ',', v_crlf);
      END IF;
    END IF;
    
    SELECT MIN(rowid) INTO v_imin FROM zen_wizard_jsondata WHERE uuid = p_uuid AND rowid > v_imin;
  END WHILE;
  
  /*
    新增 bpm 的簽核 button-group, 都新增在 view 的程式段中
    要加入判斷是否為 bpm 表單(在 zenBusiness 中)
  */
  IF p_is_bpm = 'Y' THEN
    SELECT zen_bpm_define(p_FunctionTag,p_FunctionTag_org,p_pk,v_ip,v_db) INTO v_temp_code6;
    SET v_code_view = CONCAT(v_temp_code6, v_code_view);
  END IF; 
  
  SET v_temp_code = REPLACE(v_temp_code,'@Fields_by_add@',v_code_insert);
  SET v_temp_code = REPLACE(v_temp_code,'@Fields_By_GridView@',CONCAT(v_code_gridview,','));
  SET v_temp_code = REPLACE(v_temp_code,'@Fields_By_View@',v_code_view);
  SET v_temp_code = REPLACE(v_temp_code,'@Fields_By_Edit@',v_code_update);
  SET v_temp_code = REPLACE(v_temp_code,'@Fields_By_GridView_Edit@',v_code_quickedit);
  
  /*
    如果內容有誤, 當然就不要更新到 db
  */
  IF IFNULL(v_temp_code,'') = '' THEN
    SELECT 9 AS code,'error' AS msg;
    SELECT v_temp_code AS jsoncode;
  ELSE
    -- 統一將 orm_api 改為 v3
    -- SET v_temp_code = REPLACE(v_temp_code,'/v2/','/v3/');
    -- 如果專案是 wizard, 將 db 改為 wizard_db (先 hard code, 目前暫時不想再加欄位)
    IF SUBSTRING(p_FunctionTag,1,3) = 'zen' THEN
      SET v_temp_code = REPLACE(v_temp_code,'${ls:base_db}','${ls:wizard_db}');
    END IF;
    
    -- 因為有長度的限制, 所以試著將程式依大小(40000) 切割 -- Cancel
      
    /*
      for ViewForm / CreateForm
    */
    SET p_FunctionTag = p_FunctionTag_org;
      
    -- Insert into
    SELECT COUNT(*) INTO v_inow FROM zen_jsoncode WHERE FunctionTag = p_FunctionTag AND version = 'beta';
    IF v_inow > 0 THEN
      UPDATE zen_jsoncode 
      SET jsonCode = v_temp_code
      WHERE FunctionTag = p_FunctionTag AND version = 'beta';
    ELSE 
      INSERT INTO zen_jsoncode (FunctionTag,version,jsonCode) 
      VALUES (p_FunctionTag,'beta',v_temp_code);
    END IF;  
      
    SELECT 0 AS code,'ok' AS msg;
    SELECT v_temp_code AS jsoncode;
  END IF;
END //

DELIMITER ;