diff --git a/eip_Calendar_crud.txt b/eip_Calendar_crud.txt new file mode 100644 index 0000000..405b848 --- /dev/null +++ b/eip_Calendar_crud.txt @@ -0,0 +1,99 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE eip_Calendar_crud ( + IN p_functiontag VARCHAR(100), + IN p_id VARCHAR(100), + IN p_title NVARCHAR(100), + IN p_start_time VARCHAR(30), + IN p_end_time VARCHAR(30), + IN p_userid VARCHAR(20) +) +/* + Function : 行事曆資料的新增及修改, 並考慮雲端時間差問題 + Description: 使用 Vue+FullCalendar 開發行事曆, 並用 iFrame 崁入 amis 環境 + 編輯行事曆: eip_Calendar_crud (本 sp) + 讀取行事曆: eip_getCalendar + 刪除行事曆: eip_Calendar_delete + 原本是傳入 tablename, 目前統一都改傳入 functiontag, 擴充彈性較大(盡量不動 Vue+FullCalendar) + Build Date : 2023/07/19 (轉換為 MariaDB 版本) + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2024/03/11 傳入參數由 tablename 改為 functiontag + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_adjusted_start DATETIME; + DECLARE v_adjusted_end DATETIME; + + -- 調整雲端時間 (假設 cloud_adjusttime 函數已存在) + -- SET v_adjusted_start = cloud_adjusttime(p_start_time, 1); + -- SET v_adjusted_end = cloud_adjusttime(p_end_time, 1); + -- Michael 2025-11-21 + SET v_adjusted_start = STR_TO_DATE( REPLACE(REPLACE(p_start_time, 'T', ' '), '.000Z', ''), '%Y-%m-%d %H:%i:%s'); + SET v_adjusted_end = STR_TO_DATE( REPLACE(REPLACE(p_end_time, 'T', ' '), '.000Z', ''), '%Y-%m-%d %H:%i:%s'); + + -- 根據不同的 functiontag 處理不同的表 + CASE p_functiontag + WHEN 'eipm15' THEN -- 會議室預約 + UPDATE eipplace_fc SET + response_desc = p_title, + startdate = DATE(v_adjusted_start), + starttime = TIME(v_adjusted_start), + end_date = DATE(v_adjusted_end), + endtime = TIME(v_adjusted_end) + WHERE uniqueno = p_id; + + WHEN 'eipm13' THEN -- 會議通知 + UPDATE eipmeetingrec_m SET + meeting_title = p_title, + startdate = DATE(v_adjusted_start), + starttime = TIME(v_adjusted_start), + end_date = DATE(v_adjusted_end), + end_time = TIME(v_adjusted_end) + WHERE uniqueno = p_id; + + WHEN 'eipm02' THEN -- 行程管理 + UPDATE eip_new_calendar SET + title = p_title, + start_time = v_adjusted_start, + end_time = v_adjusted_end, + s_date = DATE(v_adjusted_start), + s_time = TIME_FORMAT(v_adjusted_start, '%H:%i'), + e_date = DATE(v_adjusted_end), + e_time = TIME_FORMAT(v_adjusted_end, '%H:%i') + WHERE uuid = p_id; + + ELSE -- 默認處理 eip_core_calendar + IF p_id = '-1' AND p_userid IS NOT NULL AND p_userid != '' THEN + -- 新增記錄 + INSERT INTO eip_core_calendar ( + title, start_time, end_time, personid, + s_date, s_time, e_date, e_time + ) VALUES ( + p_title, v_adjusted_start, v_adjusted_end, p_userid, + DATE(v_adjusted_start), + TIME_FORMAT(v_adjusted_start, '%H:%i'), + DATE(v_adjusted_end), + TIME_FORMAT(v_adjusted_end, '%H:%i') + ); + ELSE + -- 更新記錄 + UPDATE eip_core_calendar SET + title = p_title, + start_time = v_adjusted_start, + end_time = v_adjusted_end, + s_date = DATE(v_adjusted_start), + s_time = TIME_FORMAT(v_adjusted_start, '%H:%i'), + e_date = DATE(v_adjusted_end), + e_time = TIME_FORMAT(v_adjusted_end, '%H:%i') + WHERE id = p_id; + END IF; + END CASE; + + -- 返回成功結果 + SELECT 0 AS code, 'ok' AS msg; +END // + +DELIMITER ; \ No newline at end of file diff --git a/eip_Calendar_delete.txt b/eip_Calendar_delete.txt new file mode 100644 index 0000000..90e1110 --- /dev/null +++ b/eip_Calendar_delete.txt @@ -0,0 +1,42 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE eip_Calendar_delete ( + IN p_functiontag VARCHAR(100), + IN p_id VARCHAR(100) +) +/* + Function : 行事曆資料的刪除功能 + Description: 使用 Vue+FullCalendar 開發行事曆, 並用 iFrame 崁入 amis 環境 + 編輯行事曆: eip_Calendar_crud + 讀取行事曆: eip_getCalendar + 刪除行事曆: eip_Calendar_delete (本 sp) + 傳入參數使用 functiontag 以保持彈性 + Build Date : 2023/07/19 (MariaDB 版本) + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2024/03/11 傳入參數由 tablename 改為 functiontag + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + -- 根據不同的 functiontag 刪除不同的表記錄 + CASE p_functiontag + WHEN 'eipm15' THEN -- 會議室預約 + DELETE FROM eipplace_fc WHERE uniqueno = p_id; + + WHEN 'eipm13' THEN -- 會議通知 + DELETE FROM eipmeetingrec_m WHERE uniqueno = p_id; + + WHEN 'eipm02' THEN -- 行程管理 + DELETE FROM eip_new_calendar WHERE uuid = p_id; + + ELSE -- 默認處理 eip_core_calendar + DELETE FROM eip_core_calendar WHERE id = p_id; + END CASE; + + -- 返回成功結果 + SELECT 0 AS code, 'ok' AS msg; +END // + +DELIMITER ; \ No newline at end of file diff --git a/eip_getCalendar.txt b/eip_getCalendar.txt new file mode 100644 index 0000000..398056a --- /dev/null +++ b/eip_getCalendar.txt @@ -0,0 +1,113 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE eip_getCalendar ( + IN p_functiontag VARCHAR(100), + IN p_userid VARCHAR(20), + IN p_start VARCHAR(30), + IN p_end VARCHAR(30) +) +/* + Function : 取得行事曆資料, 並考慮雲端時間差問題 + Description: 使用 FullCalendar + Cloud 主機時的時間差處理方案 + a. 在 FullCalendar+Vue 程式中使用 local 時間而非 UTC + b. Cloud Server 使用 UTC 時間，需進行時間調整 + c. 使用 cloud_addtime 函數調整時間差 (目前設為減8小時) + Build Date : 2023/07/19 (MariaDB 版本) + call eip_getcalendar('eipm02','admin','2023-12-31T16:00:00.000Z','2026-12-30T16:00:00.000Z'); + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2022/12/14 加入考慮 Azure 的時間差 + 2 Michael 2022/12/23 加入 FullCalendar 相關註解說明 + 3 Michael 2024/03/11 傳入參數由 tablename 改為 functiontag + 4 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + -- 處理一下日期 + SET p_start = STR_TO_DATE(p_start, '%Y-%m-%dT%H:%i:%s.000Z'); + SET p_end = STR_TO_DATE(p_end, '%Y-%m-%dT%H:%i:%s.000Z'); + + -- 創建臨時表存儲結果 + DROP TEMPORARY TABLE IF EXISTS tmp_calendar; + CREATE TEMPORARY TABLE tmp_calendar ( + id VARCHAR(100), + title NVARCHAR(100), + start DATETIME, + end DATETIME, + create_at VARCHAR(20) + ); + + -- 根據不同的 functiontag 查詢不同的表 + CASE p_functiontag + WHEN 'eipm15' THEN -- 會議室預約 + INSERT INTO tmp_calendar + SELECT + uniqueno, + response_desc, + CONCAT(startdate, ' ', starttime), + CONCAT(end_date, ' ', endtime), + personid + FROM eipplace_fc + WHERE DATE(startdate) >= DATE(p_start) + AND DATE(end_date) <= DATE(p_end) + AND (personid = p_userid OR create_user = p_userid OR update_user = p_userid); + + WHEN 'eipm13' THEN -- 會議通知 + INSERT INTO tmp_calendar + SELECT + uniqueno, + meeting_title, + CONCAT(startdate, ' ', starttime), + CONCAT(end_date, ' ', end_time), + boss_personid + FROM eipmeetingrec_m + WHERE DATE(startdate) >= DATE(p_start) + AND DATE(end_date) <= DATE(p_end) + AND (boss_personid = p_userid OR create_user = p_userid OR update_user = p_userid); + + WHEN 'eipm02' THEN -- 行程管理 + INSERT INTO tmp_calendar + SELECT + uuid, + title, + start_time, + end_time, + personid + FROM eip_new_calendar + WHERE DATE(start_time) >= DATE(p_start) + AND DATE(end_time) <= DATE(p_end) + AND (create_user = p_userid OR personid = p_userid); + + ELSE -- 默認處理 eip_core_calendar + INSERT INTO tmp_calendar + SELECT + id, + title, + start_time, + end_time, + personid + FROM eip_core_calendar + WHERE start_time >= p_start + AND end_time <= p_end + AND personid = p_userid; + END CASE; + + -- dataset 0(因為只回傳 dataset = 1 一直會報錯 20251120 + select 0, 'ok' as msg; + + -- 處理雲端時間差並返回結果 + SELECT + id, + title, + -- cloud_addtime(start) AS start, + start, + -- cloud_addtime(end) AS end, + end, + create_at + FROM tmp_calendar; + + -- 自動清理臨時表 (MariaDB 會話結束時自動刪除) +END // + +DELIMITER ; \ No newline at end of file diff --git a/get_Schedule.txt b/get_Schedule.txt new file mode 100644 index 0000000..25edba2 --- /dev/null +++ b/get_Schedule.txt @@ -0,0 +1,34 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_Schedule( + IN p_userid VARCHAR(100), + IN p_yearmonth VARCHAR(6) +) +/* + Function : 配合 amis 的 行事曆(簡易版), 取得 Schedule 資料 + 目前的寫法有問題, 沒有加入任何過濾條件, 且元件本身還在修改中, 先簡單展示用 + Description: + Build Date : 2022/1/1 + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2022/1/1 + 2 Michael 2022/10/10 改為 eip_core_calendar + 3 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + -- 设置默认返回值 + SELECT 0 AS code, 'ok' AS msg; + + -- 查询日程数据 + SELECT + DATE_FORMAT(start_time, '%Y-%m-%d %H:%i:%s') AS startTime, + DATE_FORMAT(end_time, '%Y-%m-%d %H:%i:%s') AS endTime, + title AS content + FROM eip_core_calendar + WHERE personid = p_userid + AND DATE_FORMAT(start_time, '%Y%m') = p_yearmonth; +END // + +DELIMITER ; \ No newline at end of file diff --git a/get_anytable.txt b/get_anytable.txt new file mode 100644 index 0000000..1a87709 --- /dev/null +++ b/get_anytable.txt @@ -0,0 +1,43 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_anytable( + IN p_token VARCHAR(100), + IN p_tablename VARCHAR(20) +) +/* + 萬用取值程式, 主要給 amis picker GET 查詢使用 + Description: 根據傳入的 token 驗證使用者身份後，返回指定表的數據 + Build Date : 2023/07/19 (MariaDB 版本) + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_userid VARCHAR(100); + DECLARE v_sql TEXT; + + -- 根據傳入的 token 取得 userid + SELECT userid INTO v_userid FROM sys_users WHERE token = p_token LIMIT 1; + + -- 設置默認返回值 + SELECT 0 AS code, 'ok' AS msg; + + -- 構建動態SQL + IF v_userid IS NULL OR v_userid = '' THEN + -- 無效token時返回空結果 + SET v_sql = CONCAT('SELECT * FROM ', p_tablename, ' WHERE 1=0'); + ELSE + -- 有效token時返回完整數據 + SET v_sql = CONCAT('SELECT * FROM ', p_tablename); + END IF; + + -- 執行動態SQL + SET @dynamic_sql = v_sql; + PREPARE stmt FROM @dynamic_sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; +END // + +DELIMITER ; \ No newline at end of file diff --git a/get_assignData.txt b/get_assignData.txt new file mode 100644 index 0000000..ac0a14d --- /dev/null +++ b/get_assignData.txt @@ -0,0 +1,59 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_assignData ( + -- p_bookid int = 1, + IN p_funcTag VARCHAR(100), + IN p_classid VARCHAR(100) +) +/* + Function : 配合 amis 取得 markdown(電子書, FAQ 等) 要顯示的資料 + 目前專用於電子書, 應該會繼續擴充 + get_treedata 應一併修改, 原程式都是傳入 bookid, 改傳入 tag, 但為了增加彈性, 將 tag 和 bookid 的對照, 新增到 zen_keyvalue(book_mapping_id) + Description: 電子書應該要支援多本的架構, 目前寫死一本 on line help, 應想辦法擴充(至少加入 FAQ 吧) + Build Date : 2021/10/19 + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2021/11/26 + 2 Michael 2022/04/04 改為電子書專用(修改 r43 電子書查閱) + 3 Michael 2023/01/13 修改第一個參數為 funcTag, 再參考 zen_keyvalue 轉為 bookid + +*/ +BEGIN + DECLARE v_bookid VARCHAR(10); + + -- 回傳初始結果 + SELECT 0 AS code, 'ok' AS msg; + + /* + 補初始資料 (ls:now_code) + INSERT INTO zen_keyvalue (tablename,fieldname,keyid,keyvalue) VALUES ('xxxx','book_mapping_id','1','eipr43'); + INSERT INTO zen_keyvalue (tablename,fieldname,keyid,keyvalue) VALUES ('xxxx','book_mapping_id','2','eipr44'); + INSERT INTO zen_keyvalue (tablename,fieldname,keyid,keyvalue) VALUES ('xxxx','book_mapping_id','4','eipr45'); + */ + + -- 將 tag 改為 bookid(進行中) + IF LENGTH(p_funcTag) <= 3 THEN + -- 如果傳 functag 舊版是傳 bookid(blog.gex.com.tw 舊寫法) + SET v_bookid = p_funcTag; + ELSE + SELECT keyid INTO v_bookid FROM zen_keyvalue + WHERE fieldname = 'book_mapping_id' AND keyvalue = p_funcTag LIMIT 1; + END IF; + + IF IFNULL(v_bookid, '') = '' THEN + SET v_bookid = '1'; + END IF; + + IF IFNULL(p_classid, '') = '' THEN + SELECT classid INTO p_classid FROM eip_online_books + WHERE bookid = v_bookid order by bookid LIMIT 1; + END IF; + + -- 取回指定電子書的指定章節內容回傳 + SELECT book_desc AS xValue FROM eip_online_books + WHERE bookid = v_bookid AND classid = p_classid; +END // + +DELIMITER ; \ No newline at end of file diff --git a/get_div_issue_data.txt b/get_div_issue_data.txt new file mode 100644 index 0000000..9984d5a --- /dev/null +++ b/get_div_issue_data.txt @@ -0,0 +1,73 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_div_issue_data( + IN p_div_type VARCHAR(1), -- a->e + IN p_token VARCHAR(100) +) +/* + Function : 獲取問題分配資料 + Description: 根據使用者token和問題類型返回不同分類的問題資料 + 取得指定 div 的資料, 目前分為 + A*分配給我的(尚未解決) + B*尚未分配 + C*我回報尚未解決 + D*我回報且已解決 + E*被我解決的(30日內) + Build Date : 2023/07/19 (MariaDB 版本) +*/ +BEGIN + DECLARE v_userid VARCHAR(100); + DECLARE v_err_code SMALLINT; + DECLARE v_err_msg VARCHAR(100); + + -- 初始化變數 + SET v_err_code = 0; + SET v_err_msg = 'ok'; + + -- 根據token獲取userid + SELECT userid INTO v_userid FROM sys_users WHERE token = p_token LIMIT 1; + + IF v_userid IS NULL OR v_userid = '' THEN + SET v_err_code = 4; + SET v_err_msg = '原密碼輸入錯誤, 請重新輸入'; + + SELECT v_err_code AS code, v_err_msg AS msg; + ELSE + SELECT v_err_code AS code, v_err_msg AS msg; + + -- 根據不同類型返回不同資料 + CASE UPPER(p_div_type) + WHEN 'A' THEN + -- 分配給我的(未解決) + SELECT * FROM v_div_issue l + WHERE l.responsible = v_userid + AND (l.issue_status <> '2' AND l.issue_status <> '8'); + + WHEN 'B' THEN + -- 尚未分配 + SELECT * FROM v_div_issue l + WHERE IFNULL(l.responsible, '') = ''; + + WHEN 'C' THEN + -- 由我回報的(未解決) + SELECT * FROM v_div_issue l + WHERE l.raised_by = v_userid + AND (l.issue_status <> '2' AND l.issue_status <> '8'); + + WHEN 'D' THEN + -- 我回報且已解決 + SELECT * FROM v_div_issue l + WHERE l.raised_by = v_userid + AND (l.issue_status = '2' OR l.issue_status = '8'); + + ELSE + -- 被我解決的(30日內) + SELECT * FROM v_div_issue l + WHERE l.responsible = v_userid + AND (l.issue_status = '2' OR l.issue_status = '8') + AND DATEDIFF(CURDATE(), finish_date) <= 30; + END CASE; + END IF; +END // + +DELIMITER ; diff --git a/get_gantt_data.txt b/get_gantt_data.txt new file mode 100644 index 0000000..ad293eb --- /dev/null +++ b/get_gantt_data.txt @@ -0,0 +1,87 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_gantt_data( + IN p_projectid VARCHAR(100) +) +/* + Function : 配合 amis 的擴充元件(gantt), 取得甘特圖資料 + Description: 獲取專案甘特圖資料，處理雲伺服器時間差問題 + Build Date : 2023/07/19 (MariaDB 版本) + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2022/7/31 初始版本 + 2 Michael 2022/12/14 加入 Azure 雲端時間差處理 + 3 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + -- 聲明變數 + DECLARE v_year1 INT; + DECLARE v_start_date VARCHAR(10); + + -- 設置默認起始日(去年1月1日) + SET v_year1 = YEAR(CURDATE()) - 1; + SET v_start_date = CONCAT(v_year1, '-01-01'); + + -- 創建臨時表存儲結果 + DROP TEMPORARY TABLE IF EXISTS tmp_gantt_data; + CREATE TEMPORARY TABLE tmp_gantt_data ( + id VARCHAR(100), + name VARCHAR(255), + ower VARCHAR(100), + per DECIMAL(5,2), + type TINYINT, + startTime DATE, + endTime DATE, + stoneTime DATE, + top INT, + `left` INT, + widthChild INT, + widthMe INT, + isShow TINYINT, + ROW_ID INT + ); + + -- 獲取專案PBI資料 + INSERT INTO tmp_gantt_data + SELECT + pbiid AS id, + pbi_title AS name, -- 項目名稱 + owner AS ower, -- 負責人 + pbi_rate AS per, -- 進度(完成率) + 1 AS type, -- 項目類型(1.PBI 2.mile stone 3.分組) + startdate AS startTime, + DATE_ADD(startdate, INTERVAL CAST(pbi_planworktime AS SIGNED) DAY) AS endTime, + '2022-01-01' AS stoneTime, -- 里程碑日 + 0 AS top, -- 初始top位置 + DATEDIFF(startdate, v_start_date) * 40 AS `left`, + CAST(pbi_planworktime AS SIGNED) * 40 AS widthChild, + CAST(pbi_planworktime AS SIGNED) * 40 AS widthMe, + 1 AS isShow, + @row_num := @row_num + 1 AS ROW_ID + FROM pms_pbi, (SELECT @row_num := 0) AS r + WHERE projectid = p_projectid + ORDER BY pbiid ASC; + + -- 處理雲端時間差並返回結果 + SELECT + id, + name, + ower, + per, + type, + cloud_addtime(startTime) AS startTime, + cloud_addtime(endTime) AS endTime, + cloud_addtime(stoneTime) AS stoneTime, + ((ROW_ID-1) * 40) + 15 AS top, + `left`, + widthChild, + widthMe, + isShow + FROM tmp_gantt_data; + + -- 臨時表會在會話結束時自動刪除 +END // + +DELIMITER ; diff --git a/get_keyvalue.txt b/get_keyvalue.txt new file mode 100644 index 0000000..939dcfa --- /dev/null +++ b/get_keyvalue.txt @@ -0,0 +1,51 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_keyvalue( + IN p_tablename VARCHAR(20), + IN p_fieldname VARCHAR(20) +) +/* + Function : 配合 amis 的 select 元件，取得 key-value 資料 + Description: 從 zen_keyvalue 表獲取鍵值對資料，用於下拉選項 + 合併了原有的 zen_keyvalue 和 sys_keyvalue 表功能 + Build Date : 2023/07/19 (MariaDB 版本) + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2022/05/28 初始版本 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_count INT; + + -- 設置默認返回值 + SELECT 0 AS code, 'ok' AS msg; + + -- 檢查指定表名和欄位名的記錄是否存在 + SELECT COUNT(*) INTO v_count + FROM zen_keyvalue + WHERE tablename = p_tablename + AND fieldname = p_fieldname; + + -- 根據查詢結果返回資料 + IF v_count > 0 THEN + -- 返回指定表名和欄位名的鍵值對 + SELECT + keyid AS `value`, + keyvalue AS `label` + FROM zen_keyvalue + WHERE tablename = p_tablename + AND fieldname = p_fieldname; + ELSE + -- 返回默認欄位名的鍵值對 + SELECT + keyid AS `value`, + keyvalue AS `label` + FROM zen_keyvalue + WHERE tablename = 'xxxx' + AND fieldname = p_fieldname; + END IF; +END // + +DELIMITER ; diff --git a/get_meeting_used.txt b/get_meeting_used.txt new file mode 100644 index 0000000..cf66275 --- /dev/null +++ b/get_meeting_used.txt @@ -0,0 +1,37 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_meeting_used( + IN p_idno VARCHAR(100) +) +/* + Function : 配合 amis 的行事曆(簡易版), 顯示會議室當前登記狀況 + Description: 查詢指定會議室在前後90天內的預定使用情況 + Build Date : 2023/07/19 (MariaDB 版本) + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2022/7/29 初始版本 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + -- 設置默認返回值 + SELECT 0 AS code, 'ok' AS msg; + + -- 查詢會議室使用情況(當前日期前後90天內) + SELECT + CONCAT(startdate, ' ', starttime) AS startTime, + CONCAT(end_date, ' ', endtime) AS endTime, + response_desc AS content + FROM eipplace_fc + WHERE idno = p_idno + AND ( + (DATE(startdate) >= DATE_SUB(CURDATE(), INTERVAL 90 DAY) + AND DATE(startdate) <= DATE_ADD(CURDATE(), INTERVAL 90 DAY)) + OR + (DATE(end_date) >= DATE_SUB(CURDATE(), INTERVAL 90 DAY) + AND DATE(end_date) <= DATE_ADD(CURDATE(), INTERVAL 90 DAY)) + ); +END // + +DELIMITER ; diff --git a/get_orgstructure.txt b/get_orgstructure.txt new file mode 100644 index 0000000..a46b09c --- /dev/null +++ b/get_orgstructure.txt @@ -0,0 +1,140 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_orgstructure( + IN p_type VARCHAR(20) -- 'person'/'user'/'role' +) +/* + Function : 配合 amis 的 transfer, 取得組織結構資料 + Description: 用於選擇會議人員等表單 + person - 獲取部門-人員資料(最常用) + user - 獲取角色-使用者資料(功能表使用) + role - 獲取角色資料 + Build Date : 2023/07/19 (MariaDB 版本) + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2021/10/19 初始版本 + 2 Michael 2021/10/21 新增 type 參數 + 3 Developer 2023/07/19 轉換為 MariaDB 版本並優化 +*/ +BEGIN + DECLARE v_max INT; + DECLARE v_curr_id INT; + DECLARE v_group_id INT; + DECLARE v_next_group_id INT; + DECLARE v_json_data TEXT; + DECLARE v_footer TEXT; + DECLARE v_dept_name VARCHAR(100); + DECLARE v_emp_name VARCHAR(100); + DECLARE v_person_id VARCHAR(100); + DECLARE v_comm VARCHAR(1); + + -- 創建臨時表存儲中間資料 + DROP TEMPORARY TABLE IF EXISTS temp_org_data; + CREATE TEMPORARY TABLE temp_org_data ( + xr_id VARCHAR(100), + x_id VARCHAR(100), + xr_name VARCHAR(100), + x_name VARCHAR(100), + group_id INT, + row_id INT + ); + + -- 根據類型插入資料 + IF p_type = 'role' THEN + INSERT INTO temp_org_data (xr_id, x_id, xr_name, x_name, group_id, row_id) + SELECT + '*', roleid, '(全部角色)', CONCAT('(', roleid, ') ', rolename), + @rownum := @rownum + 1, + @rownum + FROM sys_roles, (SELECT @rownum := 0) r + WHERE roleid IS NOT NULL AND roleid <> '' + ORDER BY roleid; + + ELSEIF p_type = 'user' THEN + INSERT INTO temp_org_data (xr_id, x_id, xr_name, x_name, group_id, row_id) + SELECT + '*', userid, '(全部使用者)', CONCAT('(', userid, ') ', username), + @rownum := @rownum + 1, + @rownum + FROM sys_users, (SELECT @rownum := 0) r + WHERE userid IS NOT NULL AND userid <> '' + ORDER BY userid; + + ELSE -- 預設獲取部門-人員資料 + INSERT INTO temp_org_data (xr_id, x_id, xr_name, x_name, group_id, row_id) + SELECT + bp.departmentid, bp.personid, + CONCAT('(', bp.departmentid, ') ', bm.departmentcname), + CONCAT('(', bp.personid, ') ', bp.personcname), + IF(@dept = bp.departmentid, @group, @group := @group + 1), + @rownum := @rownum + 1 + FROM + (SELECT @rownum := 0, @group := 0, @dept := '') r, + basperson bp + LEFT JOIN basdepartment bm ON bp.departmentid = bm.departmentid + WHERE bp.departmentid IS NOT NULL AND bp.departmentid <> '' + ORDER BY bp.departmentid, bp.personid; + END IF; + + -- 準備生成JSON資料 + SELECT COUNT(*) INTO v_max FROM temp_org_data; + SELECT MIN(row_id) INTO v_curr_id FROM temp_org_data; + + SET v_json_data = ''; + SET v_comm = ''; + + -- 使用GROUP_CONCAT簡化JSON構建過程 + SELECT + CONCAT( + '[', + GROUP_CONCAT( + IF( + group_id = 1 AND row_id > 1, + CONCAT( + ' },\n', + ' {\n', + ' "label": "', xr_name, '",\n', + ' "children": [\n', + ' {\n', + ' "label": "', x_name, '",\n', + ' "value": "', x_id, '"\n', + ' }', IF(row_id = v_max, '', ',') + ), + IF( + group_id = 1, + CONCAT( + ' {\n', + ' "label": "', xr_name, '",\n', + ' "children": [\n', + ' {\n', + ' "label": "', x_name, '",\n', + ' "value": "', x_id, '"\n', + ' }', IF(row_id = v_max, '', ',') + ), + CONCAT( + ' {\n', + ' "label": "', x_name, '",\n', + ' "value": "', x_id, '"\n', + ' }', IF(row_id = v_max, '', ',') + ) + ) + ) + ORDER BY row_id + SEPARATOR '\n' + ), + '\n ]\n', + ' }\n', + ' ]' + ) INTO v_json_data + FROM temp_org_data; + + -- 返回結果 + SELECT 0 AS code, 'ok' AS msg; + SELECT v_json_data AS jsoncode; + + -- 臨時表會在會話結束時自動刪除 +END // + +DELIMITER ; diff --git a/get_parameter.txt b/get_parameter.txt new file mode 100644 index 0000000..7b66202 --- /dev/null +++ b/get_parameter.txt @@ -0,0 +1,30 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_parameter( + IN p_sys_id VARCHAR(10) +) +/* + Function : 讀取 sys_parameter 所有的參數值, logon 後存到 localStorage + Description: + Build Date : 2022/05/04 + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2022/05/04 + 2 Michael 2023/07/08 新增 @sys_id 參數(* 表示全部) + 3 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + -- 设置默认返回值 + SELECT 0 AS code, 'ok' AS msg; + + -- 查询参数数据 + IF p_sys_id = '*' OR p_sys_id IS NULL OR p_sys_id = '' THEN + SELECT * FROM sys_parameter; + ELSE + SELECT * FROM sys_parameter WHERE systemid = p_sys_id; + END IF; +END // + +DELIMITER ; \ No newline at end of file diff --git a/get_tableschema.txt b/get_tableschema.txt new file mode 100644 index 0000000..8266179 --- /dev/null +++ b/get_tableschema.txt @@ -0,0 +1,99 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_tableschema( + IN p_data NVARCHAR(100) +) +/* + Function : 查詢檔案結構 + description: + build date : 2023/08/23 + + Modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 Michael 2023/08/23 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) + 3 Assistant 2025/08/09 加入自動從information_schema讀取結構功能 +*/ +BEGIN + DECLARE v_count INT; + + -- 檢查gex_filestru是否有資料 + SELECT COUNT(*) INTO v_count FROM gex_filestru; + + -- 如果沒資料, 就從information_schema讀取並寫入 + IF v_count = 0 THEN + -- 先清空表(以防萬一) + TRUNCATE TABLE gex_filestru; + + -- 從information_schema讀取所有表結構並插入到gex_filestru + INSERT INTO gex_filestru ( + Table_name, table_description, seqno, field_name, field_desc, + field_type, field_len, field_dec, table_pk, table_index, + field_isnull, field_default + ) + SELECT + t.TABLE_NAME AS Table_name, + '' AS table_description, -- 初始為空，可手動補充 + c.ORDINAL_POSITION AS seqno, + c.COLUMN_NAME AS field_name, + '' AS field_desc, -- 初始為空，可手動補充 + c.DATA_TYPE AS field_type, + -- c.CHARACTER_MAXIMUM_LENGTH AS field_len, + case when c.CHARACTER_MAXIMUM_LENGTH > 9999 then 9999 else c.CHARACTER_MAXIMUM_LENGTH end AS field_len, + c.NUMERIC_SCALE AS field_dec, + IF(kcu.COLUMN_NAME IS NOT NULL, 'Y', 'N') AS table_pk, + 'N' AS table_index, -- 初始為N，可根據實際索引調整 + IF(c.IS_NULLABLE = 'YES', 'Y', 'N') AS field_isnull, + c.COLUMN_DEFAULT AS field_default + FROM + information_schema.TABLES t + JOIN information_schema.COLUMNS c ON t.TABLE_NAME = c.TABLE_NAME AND t.TABLE_SCHEMA = c.TABLE_SCHEMA + LEFT JOIN information_schema.KEY_COLUMN_USAGE kcu ON + c.TABLE_NAME = kcu.TABLE_NAME AND + c.COLUMN_NAME = kcu.COLUMN_NAME AND + c.TABLE_SCHEMA = kcu.TABLE_SCHEMA AND + kcu.CONSTRAINT_NAME = 'PRIMARY' + WHERE + t.TABLE_SCHEMA = DATABASE() AND + t.TABLE_TYPE = 'BASE TABLE'; + + -- 更新表描述為表注釋(如果有) + UPDATE gex_filestru f + JOIN information_schema.TABLES t ON f.Table_name = t.TABLE_NAME + SET f.table_description = t.TABLE_COMMENT + WHERE t.TABLE_SCHEMA = DATABASE(); + + -- 更新字段描述為列注釋(如果有) + UPDATE gex_filestru f + JOIN information_schema.COLUMNS c ON f.Table_name = c.TABLE_NAME AND f.field_name = c.COLUMN_NAME + SET f.field_desc = c.COLUMN_COMMENT + WHERE c.TABLE_SCHEMA = DATABASE(); + END IF; + + -- 设置默认返回值 + SELECT 0 AS code, 'ok' AS msg; + + -- 查询表结构 + IF p_data = '*' THEN + SELECT + Table_name, table_description, seqno, field_name, field_desc, + field_type, field_len, field_dec, table_pk, table_index, + field_isnull, field_default + FROM gex_filestru + ORDER BY table_name, seqno; + ELSE + SELECT + Table_name, table_description, seqno, field_name, field_desc, + field_type, field_len, field_dec, table_pk, table_index, + field_isnull, field_default + FROM gex_filestru + WHERE table_name LIKE CONCAT('%', p_data, '%') + OR table_description LIKE CONCAT('%', p_data, '%') + OR field_name LIKE CONCAT('%', p_data, '%') + OR field_desc LIKE CONCAT('%', p_data, '%') + ORDER BY table_name, seqno; + END IF; +END // + +DELIMITER ; \ No newline at end of file diff --git a/get_treedata.txt b/get_treedata.txt new file mode 100644 index 0000000..c000f70 --- /dev/null +++ b/get_treedata.txt @@ -0,0 +1,340 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE get_treedata( + IN p_type VARCHAR(20), + IN p_para01 VARCHAR(100) +) +/* + Function : 配合 amis 的 treeview, 取得 year-sprint 類的2階資料 + 目前的寫法只適用於固定2階, 如果階數不固定, 要找時間修改(bom 展開), 暫時不適用 + 擴充 @para, 目前是電子書專用, 如果有 @, @後的就是內文的全文檢索內容 + Description: 可以用在 pbi, 會計科目等左方有 tree-view 的 UX, api 回傳用 6 + 新增 @type 參數 + sprint 取得 year-sprint 資料(給 menu 使用) + basdepartment + acctitle 取得 類別-科目 資料(大部分都是用這個) + eipmxx.idno 避免 key 重複導致的錯誤 + Build Date : 2021/10/19 + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2021/11/26 + 2 Michael 2021/12/31 新增 on lone books + 3 Michael 2022/04/14 新增 sys_aside_setup, aside 改為依設定即可產生 aside 相關 json 設定 + 4 Michael 2022/06/19 @type 加上 tag.type 以防止重複, tag 僅供識別用 + 5 Michael 2022/07/18 key-value 擴充能支援2層式的 tree(開發中) + 6 Michael 2022/07/27 擴充 @para01 內容, 支援內文查詢過濾 + 7 Michael 2023/01/13 將 @para01 第一碼的 bookid 改為傳入 functag + 8 Michael 2023/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_max INT; + DECLARE v_currid INT; + DECLARE v_groupid INT; + DECLARE v_next_groupid INT; + DECLARE v_datas LONGTEXT; + DECLARE v_footer VARCHAR(600); + DECLARE v_deptname VARCHAR(100); + DECLARE v_empname VARCHAR(100); + DECLARE v_personid VARCHAR(100); + DECLARE v_crlf VARCHAR(2); + DECLARE v_comm VARCHAR(1); + + DECLARE v_aside_id VARCHAR(100); + DECLARE v_group_id VARCHAR(100); + DECLARE v_group_name VARCHAR(100); + DECLARE v_row_id VARCHAR(100); + DECLARE v_row_name VARCHAR(100); + DECLARE v_group_partitionby VARCHAR(100); + DECLARE v_group_orderby VARCHAR(100); + DECLARE v_row_orderby VARCHAR(100); + DECLARE v_filter_field VARCHAR(100); + DECLARE v_tablename VARCHAR(100); + DECLARE v_rel_tablename VARCHAR(100); + DECLARE v_g_partition1 VARCHAR(100); + DECLARE v_g_partition2 VARCHAR(100); + DECLARE v_filter_value VARCHAR(100); + + DECLARE v_para01, v_para02 VARCHAR(100); + + DECLARE v_pos INT; + DECLARE v_cnt INT; + DECLARE v_sql_cmd LONGTEXT; + + DECLARE v_guid VARCHAR(100); + DECLARE v_where_keyvalue VARCHAR(100); + + SET v_crlf = CONCAT(CHAR(10), CHAR(13)); + + -- 創建臨時表來存儲數據 + DROP TEMPORARY TABLE IF EXISTS temp_data; + CREATE TEMPORARY TABLE temp_data ( + xr_id VARCHAR(100), + x_id VARCHAR(100), + xr_name VARCHAR(100), + x_name VARCHAR(100), + groupid INT, + rowid INT + ) ENGINE=MEMORY; + + -- 取得相關設定參數 + SELECT + aside_id, + group_id, + group_name, + row_id, + row_name, + group_partitionby, + group_orderby, + row_orderby, + filter_field, + tablename, + IFNULL(rel_tablename,''), + filter_value + INTO + v_aside_id, + v_group_id, + v_group_name, + v_row_id, + v_row_name, + v_group_partitionby, + v_group_orderby, + v_row_orderby, + v_filter_field, + v_tablename, + v_rel_tablename, + v_filter_value + FROM sys_aside_setup WHERE aside_id = p_type; + + -- 防錯 + IF IFNULL(v_group_orderby,'') = '' THEN + SET v_group_orderby = v_row_id; + END IF; + + IF IFNULL(v_row_orderby,'') = '' THEN + SET v_row_orderby = v_row_id; + END IF; + + -- 去除 p_type 中的 tag + SET v_pos = LOCATE('.', p_type); + IF v_pos > 0 THEN + SET p_type = SUBSTRING(p_type, v_pos+1); + END IF; + + -- 生成 GUID + SET v_guid = REPLACE(UUID(), '-', ''); + SET v_where_keyvalue = ''; + + -- 專門客製 for key-value + IF v_tablename = 'zen_keyvalue' THEN + -- 取得是否有 desc, 若有, 記錄起來 + SELECT COUNT(*) INTO v_cnt FROM zen_keyvalue WHERE fieldname = p_type AND IFNULL(keydesc,'') <> ''; + + SET v_where_keyvalue = CONCAT(' AND fieldname = ', QUOTE(p_type)); + END IF; + + -- 行銷類的專案過濾(test ...) + IF IFNULL(v_filter_field,'') <> '' AND IFNULL(v_filter_value,'') <> '' THEN + SET v_where_keyvalue = CONCAT(' AND ', v_filter_field, ' = ', QUOTE(v_filter_value)); + END IF; + + SET v_sql_cmd = ''; + + -- 電子書有特殊語法, 其他都統一用法 + IF p_type <> 'classid' THEN + -- 目前支持 p_type = sprintid 及 departmentid, 日後會隨 sys_aside_setup 的資料內容增加 + + SET v_g_partition1 = ''; + SET v_g_partition2 = ''; + IF IFNULL(v_group_partitionby,'') <> '' THEN + SET v_g_partition1 = CONCAT('PARTITION BY ', IF(v_rel_tablename = '', '', 'R.'), v_group_partitionby); + SET v_g_partition2 = CONCAT(IF(v_rel_tablename = '', '', CONCAT('R.', v_group_partitionby, ',')), ''); + END IF; + + IF v_rel_tablename = '' THEN + -- 如果 key-value 有設定 keydesc, 就展開成2層的 tree + IF v_cnt > 0 THEN + SET v_g_partition1 = 'PARTITION BY keydesc'; + SET v_g_partition2 = 'keydesc,'; + + SET v_sql_cmd = CONCAT( + 'INSERT INTO sys_aside_temp (aside_guid, xr_id, x_id, xr_name, x_name, groupid, rowid) ', + 'SELECT ', QUOTE(v_guid), ', ', + IF(v_group_id = '*', QUOTE(v_group_id), v_group_id), ', ', v_row_id, ', ', + IF(v_group_id = '*', QUOTE(v_group_name), v_group_name), ', ', v_row_name, ', ', + 'ROW_NUMBER() OVER(', v_g_partition1, ' ORDER BY ', v_group_orderby, ') AS groupid, ', + 'ROW_NUMBER() OVER(ORDER BY ', v_g_partition2, v_row_orderby, ') AS rowid ', + 'FROM ', v_tablename, ' M ', + 'WHERE IFNULL(', v_row_id, ', '''' ) <> ''''', v_where_keyvalue + ); + ELSE + SET v_sql_cmd = CONCAT( + 'INSERT INTO sys_aside_temp (aside_guid, xr_id, x_id, xr_name, x_name, groupid, rowid) ', + 'SELECT ', QUOTE(v_guid), ', ', + IF(v_group_id = '*', QUOTE(v_group_id), v_group_id), ', ', v_row_id, ', ', + IF(v_group_id = '*', QUOTE(v_group_name), v_group_name), ', ', v_row_name, ', ', + 'ROW_NUMBER() OVER(', v_g_partition1, ' ORDER BY ', v_group_orderby, ') AS groupid, ', + 'ROW_NUMBER() OVER(ORDER BY ', v_g_partition2, v_row_orderby, ') AS rowid ', + 'FROM ', v_tablename, ' M ', + 'WHERE IFNULL(', v_row_id, ', '''' ) <> ''''', v_where_keyvalue + ); + END IF; + ELSE + -- 如果有 rel_tablename, 就一定要設定 group_partitionby + SET v_sql_cmd = CONCAT( + 'INSERT INTO sys_aside_temp (aside_guid, xr_id, x_id, xr_name, x_name, groupid, rowid) ', + 'SELECT ', QUOTE(v_guid), ', ', + IF(v_group_id = '*', QUOTE(CONCAT('R.', v_group_id)), CONCAT('R.', v_group_id)), ', ', CONCAT('M.', v_row_id), ', ', + IF(v_group_id = '*', QUOTE(CONCAT('R.', v_group_name)), CONCAT('R.', v_group_name)), ', ', CONCAT('M.', v_row_name), ', ', + 'ROW_NUMBER() OVER(', v_g_partition1, ' ORDER BY ', CONCAT('M.', v_group_orderby), ') AS groupid, ', + 'ROW_NUMBER() OVER(ORDER BY ', v_g_partition2, CONCAT('M.', v_row_orderby), ') AS rowid ', + 'FROM ', v_tablename, ' M ', + 'LEFT JOIN ', v_rel_tablename, ' R ON M.', v_group_partitionby, ' = R.', v_group_partitionby, ' ', + 'WHERE IFNULL(', CONCAT('M.', v_row_id), ', '''' ) <> ''''', v_where_keyvalue + ); + END IF; + ELSE + -- 處理 p_para01/02 + SET v_pos = LOCATE('@', p_para01); + SET v_para02 = ''; + IF v_pos > 0 THEN + SET v_para02 = SUBSTRING(p_para01, v_pos+1, 100); + SET p_para01 = SUBSTRING(p_para01, 1, v_pos-1); + + -- 將 p_para01 由 functag 改為 bookid + SELECT keyid INTO v_para01 FROM zen_keyvalue WHERE fieldname = 'book_mapping_id' AND keyvalue = p_para01; + IF IFNULL(v_para01, '') = '' THEN + SET v_para01 = '1'; + END IF; + END IF; + + -- 目前是專 for 電子書(p_type = 'classid') + IF IFNULL(v_group_partitionby, '') = '' THEN + SET v_sql_cmd = CONCAT( + 'INSERT INTO sys_aside_temp (aside_guid, xr_id, x_id, xr_name, x_name, groupid, rowid) ', + 'SELECT ', QUOTE(v_guid), ', ', + 'x.', v_group_id, ', x.', v_row_id, ', b.', v_group_name, ', x.', v_group_name, ', groupid, rowid', v_crlf, + 'FROM (', v_crlf, + ' SELECT ', v_group_id, ', ', v_row_id, ', ', v_group_name, ', ', + IF(v_group_name <> v_row_name, CONCAT(v_row_name, ', '), ''), + v_group_id, ' AS p_classid,', v_crlf, + ' ROW_NUMBER() OVER(ORDER BY ', v_group_orderby, ') AS groupid,', v_crlf, + ' ROW_NUMBER() OVER(ORDER BY ', v_row_orderby, ') AS rowid', v_crlf, + ' FROM ', v_tablename, v_crlf, + ' WHERE IFNULL(', v_group_id, ', '''' ) <> '''' AND ', v_filter_field, ' = ', v_para01, v_crlf, + IF(v_para02 <> '', CONCAT(' AND book_desc LIKE ', QUOTE(CONCAT('%', v_para02, '%')), v_crlf), ''), + ') x', v_crlf, + 'LEFT JOIN ', v_tablename, ' b ON x.p_classid = b.', v_row_id, ' AND ', v_filter_field, ' = ', v_para01 + ); + ELSE + SET v_sql_cmd = CONCAT( + 'INSERT INTO sys_aside_temp (aside_guid, xr_id, x_id, xr_name, x_name, groupid, rowid) ', + 'SELECT ', QUOTE(v_guid), ', ', + 'x.', v_group_id, ', x.', v_row_id, ', b.', v_group_name, ', x.', v_group_name, ', groupid, rowid', v_crlf, + 'FROM (', v_crlf, + ' SELECT ', v_group_id, ', ', v_row_id, ', ', v_group_name, ', ', + IF(v_group_name <> v_row_name, CONCAT(v_row_name, ', '), ''), + v_group_id, ' AS p_classid,', v_crlf, + ' ROW_NUMBER() OVER(PARTITION BY ', v_group_partitionby, ' ORDER BY ', v_group_orderby, ') AS groupid,', v_crlf, + ' ROW_NUMBER() OVER(ORDER BY ', v_row_orderby, ') AS rowid', v_crlf, + ' FROM ', v_tablename, v_crlf, + ' WHERE IFNULL(', v_group_id, ', '''' ) <> '''' AND ', v_filter_field, ' = ', v_para01, v_crlf, + IF(v_para02 <> '', CONCAT(' AND book_desc LIKE ', QUOTE(CONCAT('%', v_para02, '%')), v_crlf), ''), + ') x', v_crlf, + 'LEFT JOIN ', v_tablename, ' b ON x.p_classid = b.', v_row_id, ' AND ', v_filter_field, ' = ', v_para01 + ); + END IF; + END IF; + + -- 執行動態SQL + SET @sql = v_sql_cmd; + PREPARE stmt FROM @sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; + + -- 將資料寫入臨時表 + INSERT INTO temp_data + SELECT xr_id, x_id, xr_name, x_name, groupid, rowid + FROM sys_aside_temp + WHERE aside_guid = v_guid; + + DELETE FROM sys_aside_temp WHERE aside_guid = v_guid; + + /* 開始 main loop */ + SELECT COUNT(*) INTO v_max FROM temp_data; + SELECT MIN(rowid) INTO v_currid FROM temp_data; + + SET v_datas = ''; + SET v_comm = ''; + + WHILE v_currid <= v_max DO + -- get data + SELECT + groupid, xr_name, x_id, x_name + INTO + v_groupid, v_deptname, v_personid, v_empname + FROM temp_data + WHERE rowid = v_currid; + + IF v_currid = v_max THEN + SET v_comm = ''; + ELSE + SELECT groupid INTO v_next_groupid FROM temp_data WHERE rowid = v_currid + 1; + IF v_next_groupid = 1 THEN + SET v_comm = ''; + ELSE + SET v_comm = ','; + END IF; + END IF; + + IF v_groupid = 1 THEN + IF v_currid > 1 THEN + SET v_footer = CONCAT( + ' ]', v_crlf, + ' },', v_crlf + ); + ELSE + SET v_footer = ''; + END IF; + + SET v_datas = CONCAT( + v_datas, v_footer, + ' {', v_crlf, + ' "label": "', v_deptname, '",', v_crlf, + ' "children": [', v_crlf, + ' {', v_crlf, + ' "label": "', v_empname, '",', v_crlf, + ' "value": "', v_personid, '"', v_crlf, + ' }', v_comm, v_crlf + ); + ELSE + SET v_datas = CONCAT( + v_datas, + ' {', v_crlf, + ' "label": "', v_empname, '",', v_crlf, + ' "value": "', v_personid, '"', v_crlf, + ' }', v_comm, v_crlf + ); + END IF; + + SET v_currid = v_currid + 1; + END WHILE; + + SET v_datas = CONCAT( + ' [', v_crlf, + v_datas, + ' ]', v_crlf, + ' }', v_crlf, + ' ]' + ); + + -- 返回結果 + SELECT 0 AS code, 'ok' AS msg; + SELECT v_datas AS jsoncode; + + -- 清理臨時表 + DROP TEMPORARY TABLE IF EXISTS temp_data; +END // + +DELIMITER ; \ No newline at end of file diff --git a/gex_chart_comm.txt b/gex_chart_comm.txt new file mode 100644 index 0000000..32d6abd --- /dev/null +++ b/gex_chart_comm.txt @@ -0,0 +1,57 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE gex_chart_comm( + IN p_functiontag VARCHAR(20), -- 程式代號(可以自行控制讀取的資料來源) + IN p_date1 VARCHAR(10), + IN p_date2 VARCHAR(10), + IN p_type VARCHAR(20) -- bar/line/pie ... +) +/* + function : 客戶訂單業績排行前 10 的統計圖, 支援 5種圖形顯示, 這是 amis chart 類的報表的標準寫法 + description: 將一般報表, 轉為 amis queryGroup 類的報表的 sp 範本 (本程式待驗證 ...) + build date : 2021/12/02 + + call sample: + CALL gex_chart_comm('opor11','2020-01-01','2020-12-31','pie') + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 Michael 2021/12/02 新增 + 2 Michael 2025/08/06 改寫為 MariaDB 版本 +*/ +BEGIN + DECLARE v_uuid CHAR(100); + DECLARE v_data TEXT; + + -- 生成 UUID + SET v_uuid = UUID(); + + -- 先刪除可能存在的舊數據 + DELETE FROM dw_sys_chart_data WHERE uuid = v_uuid; + + -- 客戶業績排行前 10 + IF p_functiontag = 'OPOR11' then + INSERT INTO dw_sys_chart_data (uuid, functiontag, xname, xvalue) + SELECT v_uuid, p_functiontag, IFNULL(c.corpshortname, m.custid), CAST(SUM(totalamount) AS DECIMAL(18,2)) AS amt + FROM opoorder2_m m + LEFT JOIN bascustomer c ON m.custid = c.custid + WHERE billdate >= p_date1 AND billdate <= p_date2 + GROUP BY IFNULL(c.corpshortname, m.custid) + ORDER BY SUM(totalamount) DESC + LIMIT 10; + -- else if ... + end if; + + -- 調用通用函數 (假設已存在對應的 MariaDB 函數) + SELECT sys_genchart(v_uuid, p_type) INTO v_data; + + -- 處理模板數據 (假設已存在對應的 MariaDB 存儲過程) + CALL sys_chart_process(v_uuid); + + -- 返回結果 + SELECT 0 AS code, 'ok' AS msg; + SELECT v_data AS jsoncode; +END // + +DELIMITER ; \ No newline at end of file diff --git a/qry_pmsq01.txt b/qry_pmsq01.txt new file mode 100644 index 0000000..34146d8 --- /dev/null +++ b/qry_pmsq01.txt @@ -0,0 +1,47 @@ +DELIMITER // + +CREATE PROCEDURE qry_pmsq01( + IN p_projectid1 VARCHAR(50), + IN p_projectid2 VARCHAR(50) +) +/* + 專案進度一覽表: 參考華炎的報表內容 + 專案名稱,客戶(無),專案經理,項目狀態,截止日期,待完成任務,待解決問題 +*/ +BEGIN + -- 返回狀態訊息 + SELECT 0 AS code, 'ok' AS msg; + + -- 主查詢 + WITH wbs AS ( + SELECT projectid, COUNT(*) AS wbs_no + FROM pms_pbi + WHERE pbi_type = 'Task' AND pbi_rate <> 100 + GROUP BY projectid + ), + issue AS ( + SELECT projectid, COUNT(*) AS issue_no + FROM pms_pbi + WHERE pbi_type = 'Issue' AND pbi_rate <> 100 + GROUP BY projectid + ) + SELECT + P1.projectid, + P1.proj_cname, + P1.proj_boss, + P2.personcname, + P1.proj_status, + K.keyvalue AS proj_status_name, + P1.proj_enddate, + IFNULL(W.wbs_no, 0) AS wbs_no, + IFNULL(I.issue_no, 0) AS issue_no + FROM pmsproject P1 + LEFT JOIN basperson P2 ON P1.proj_boss = P2.personid + LEFT JOIN wbs W ON P1.projectid = W.projectid + LEFT JOIN issue I ON P1.projectid = I.projectid + LEFT JOIN zen_keyvalue K ON K.fieldname = 'proj_status' AND K.keyid = P1.proj_status + WHERE CASE WHEN p_projectid1 = '*' THEN 1 ELSE P1.projectid >= p_projectid1 END + AND CASE WHEN p_projectid2 = '*' THEN 1 ELSE P1.projectid <= p_projectid2 END; +END // + +DELIMITER ; \ No newline at end of file diff --git a/response_issue_status.txt b/response_issue_status.txt new file mode 100644 index 0000000..9add837 --- /dev/null +++ b/response_issue_status.txt @@ -0,0 +1,70 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE response_issue_status( + IN p_token VARCHAR(100), + IN p_functiontag VARCHAR(100), + IN p_id INT, + IN p_assign_user VARCHAR(10), + IN p_new_status VARCHAR(100), + IN p_ok_rate SMALLINT, + IN p_release_readme TEXT +) +/* + Function : 處理問題狀態變更和指派 + Description: 根據不同的功能標籤處理不同類型的問題狀態更新 + Build Date : 2023/07/19 (MariaDB 版本) +*/ +BEGIN + DECLARE v_userid VARCHAR(10); + DECLARE v_org_userid VARCHAR(10); + DECLARE v_err_code SMALLINT; + DECLARE v_seq INT; + DECLARE v_err_msg VARCHAR(100); + + SET v_err_code = 0; + SET v_err_msg = '操作成功'; + + -- 根據token獲取userid + SELECT userid INTO v_userid FROM sys_users WHERE token = p_token LIMIT 1; + + IF v_userid IS NULL OR v_userid = '' THEN + SET v_err_code = 4; + SET v_err_msg = '認證失敗，請重新登錄'; + ELSE + -- 根據功能標籤處理不同類型的問題 + IF p_functiontag = 'pmsm11' THEN -- Product Backlog Item + -- 獲取原始負責人和當前最大序號 + SELECT controller INTO v_org_userid FROM pms_pbi WHERE pbiid = p_id; + SELECT IFNULL(MAX(seqno), 0) INTO v_seq FROM pms_pbi_log WHERE pbiid = p_id; + + -- 寫入日誌 + INSERT INTO pms_pbi_log (pbiid, response_date, response_by, assign_user, response, pbi_status, pbi_rate, seqno) + VALUES (p_id, NOW(), v_userid, p_assign_user, p_release_readme, p_new_status, p_ok_rate, v_seq+1); + + -- 更新主表狀態 + UPDATE pms_pbi + SET pbi_status = IFNULL(p_new_status, pbi_status), + controller = IFNULL(v_userid, controller), + pbi_rate = IFNULL(p_ok_rate, pbi_rate) + WHERE pbiid = p_id; + + ELSEIF p_functiontag = 'pmsm12' THEN -- Issue Log 維護作業 + -- 獲取當前最大序號 + SELECT IFNULL(MAX(seqno), 0) INTO v_seq FROM pms_issuelog_d WHERE issueid = p_id; + + -- 寫入日誌 + INSERT INTO pms_issuelog_d (issueid, raised_date, raised_by, assign_user, response, issue_status, seqno) + VALUES (p_id, NOW(), v_userid, p_assign_user, p_release_readme, p_new_status, v_seq+1); + + -- 更新主表狀態 + UPDATE pms_issuelog + SET issue_status = IFNULL(p_new_status, issue_status), + responsible = IFNULL(p_assign_user, responsible) + WHERE issueid = p_id; + END IF; + END IF; + + SELECT v_err_code AS code, v_err_msg AS msg; +END // + +DELIMITER ; diff --git a/set_bbs_readed.txt b/set_bbs_readed.txt new file mode 100644 index 0000000..b69bf76 --- /dev/null +++ b/set_bbs_readed.txt @@ -0,0 +1,32 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE set_bbs_readed( + IN p_token VARCHAR(100), + IN p_id INT +) +/* + Function : 更新 eipbbs_d 的已讀紀錄(在 eipbbs_m 中 button call) + Description: eipm11 PBI 回報進度及狀態 + Build Date : 2022/07/02 + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2022/07/02 Init + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_userid VARCHAR(100); + + -- 根據傳入的 token 取得 userid + SELECT userid INTO v_userid FROM sys_users WHERE token = p_token LIMIT 1; + + -- update eipbbs_d + UPDATE eipbbs_d SET is_read = 'Y' + WHERE uniqueno = p_id AND idno = v_userid; + + -- 返回成功 result + SELECT 0 AS code, 'ok' AS msg; +END // + +DELIMITER ; diff --git a/sync_data_log.txt b/sync_data_log.txt new file mode 100644 index 0000000..46a019b --- /dev/null +++ b/sync_data_log.txt @@ -0,0 +1,36 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE sync_data_log( + IN p_type VARCHAR(20), + IN p_id INT, + IN p_userid VARCHAR(100), + IN p_status VARCHAR(10), + IN p_rate INT, + IN p_response TEXT +) +/* + Function : 配合 amis 的 edit log, 存檔時先 insert 一筆資料到 detail, 再 update 到表頭(暫時沒有用) + Description: 希望可以寫成根據設定 update, 但是第一個版本還是先 hard code, 晚點再改成通用版 + Build Date : 2022/06/02 + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2022/06/02 Init + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + -- insert log + INSERT INTO pms_pbi_log (pbiid, response_date, response_by, response, pbi_status, pbi_rate) + VALUES (p_id, NOW(), p_userid, p_response, p_status, p_rate); + + -- 更新主表?? + UPDATE pms_pbi + SET pbi_status = p_status, pbi_rate = p_rate + WHERE pbiid = p_id; + + SELECT 0 AS code, 'ok' AS msg; + +END // + +DELIMITER ; \ No newline at end of file diff --git a/sync_myfavor.txt b/sync_myfavor.txt new file mode 100644 index 0000000..831ea66 --- /dev/null +++ b/sync_myfavor.txt @@ -0,0 +1,41 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE sync_myfavor( + IN p_moduleid VARCHAR(100), + IN p_functiontag VARCHAR(100), + IN p_userid VARCHAR(100) +) + Build Date : 2023/11/01 + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2023/11/01 Init + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_count INT; + + -- check if exists + SELECT COUNT(*) INTO v_count + FROM sys_myfavor + WHERE module = p_moduleid + AND functiontag = p_functiontag + AND userid = p_userid; + + -- 已存在刪除，否則 update + IF v_count > 0 THEN + DELETE FROM sys_myfavor + WHERE module = p_moduleid + AND functiontag = p_functiontag + AND userid = p_userid; + ELSE + INSERT INTO sys_myfavor (module, functiontag, userid) + VALUES (p_moduleid, p_functiontag, p_userid); + END IF; + + -- return + SELECT 0 AS code, 'ok' AS msg; +END // + +DELIMITER ; \ No newline at end of file diff --git a/sys_chart_process.txt b/sys_chart_process.txt new file mode 100644 index 0000000..e0ca469 --- /dev/null +++ b/sys_chart_process.txt @@ -0,0 +1,36 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE sys_chart_process( + IN p_uuid VARCHAR(100) +) +/* + function : 刪除 amis chart 類的報表所產生的站存資料, 一般是被 chart 類報表的 sp 於執行取得資料後呼叫 + description: 可參考 gexrpt_opor11 的呼叫方式, 基本上不會單獨執行 + build date : 2021/10/16 + + call sample: + exec sys_chart_process @uuid + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2021/10/16 新增 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_max INT; + + -- get max + SELECT IFNULL(MAX(rowid), 0) INTO v_max FROM sys_chart_data; + + -- delete template data + DELETE FROM sys_chart_data WHERE uuid = p_uuid; + + -- 如果?据量?大?重置表 + IF v_max > 10000 THEN + TRUNCATE TABLE sys_chart_data; + ALTER TABLE sys_chart_data AUTO_INCREMENT = 1; + END IF; +END // + +DELIMITER ; \ No newline at end of file diff --git a/sys_d_update_m.txt b/sys_d_update_m.txt new file mode 100644 index 0000000..8642bdd --- /dev/null +++ b/sys_d_update_m.txt @@ -0,0 +1,73 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE sys_d_update_m( + IN p_tablename VARCHAR(100) +) +/* + function : 配合 orm_api 的存檔後過帳, 當新增一筆 log detail 後, update master 的某1-2 個同名欄位的值 + description: 目前先配合 omi_api 的存檔後機制(sys_transaction) 執行, 希望能全部透過設定, 而不是每一個 table 都必須客製 + copy from sys_transfer_comm + 目前只能針對 detail 或 log 的 pk 是自增值的情況寫入 + build date : 2022/06/04 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2022-6-4 測試 + 2 Michael 2023-02-11 測試並修改 pms_pbi_log, 目前已可正確 update, 但仍需繼續觀察 + 3 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_relation_key VARCHAR(100); + DECLARE v_middle_field VARCHAR(100); + DECLARE v_dest_table VARCHAR(100); + DECLARE v_dest_field VARCHAR(100); + DECLARE v_dest_field2 VARCHAR(100); + DECLARE v_dest_field2_value VARCHAR(100); + DECLARE v_sql TEXT; + DECLARE v_para01 VARCHAR(100); + DECLARE v_para02 VARCHAR(100); + + -- get data + SELECT + IFNULL(RelationKey,''), IFNULL(MiddleField,''), + IFNULL(para01,''), IFNULL(para02,''), + IFNULL(dest_table,''), IFNULL(dest_field,''), + IFNULL(dest_field2,''), IFNULL(dest_field2_value,'') + INTO + v_relation_key, v_middle_field, + v_para01, v_para02, + v_dest_table, v_dest_field, + v_dest_field2, v_dest_field2_value + FROM sys_transaction + WHERE tablename = p_tablename; + + -- 构建 SQL + SET @sql = CONCAT( + 'SELECT ', v_dest_field, ', IFNULL(', v_dest_field2, ', ''''), ', v_middle_field, + ' INTO @v_field1, @v_field2, @v_field3 ', + 'FROM ', p_tablename, + ' WHERE ', v_relation_key, ' = ''', v_para01, ''';' + ); + + IF v_dest_field2 IS NOT NULL AND v_dest_field2 <> '' THEN + SET @sql = CONCAT(@sql, + 'UPDATE ', v_dest_table, + ' SET ', v_dest_field, ' = @v_field1, ', v_dest_field2, ' = @v_field2 ', + 'WHERE ', v_middle_field, ' = @v_field3;' + ); + ELSE + SET @sql = CONCAT(@sql, + 'UPDATE ', v_dest_table, + ' SET ', v_dest_field, ' = @v_field1 ', + 'WHERE ', v_middle_field, ' = @v_field3;' + ); + END IF; + + -- exec SQL + PREPARE stmt FROM @sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; +END // + +DELIMITER ; \ No newline at end of file diff --git a/sys_d_update_m2.txt b/sys_d_update_m2.txt new file mode 100644 index 0000000..44ea03f --- /dev/null +++ b/sys_d_update_m2.txt @@ -0,0 +1,71 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE sys_d_update_m2( + IN p_tablename VARCHAR(100) +) +/* + function : 配合 orm_api 的存檔後過帳, 當新增一筆 log detail 後, 呼叫 sys_d_update_m, 然後又 update master 時, 會回復原值, 所以只好在 master 存檔後, 再 call 本 func + description: 目前先配合 omi_api 的存檔後機制(sys_transaction) 執行, 希望能全部透過設定, 而不是每一個 table 都必須客製 + copy from sys_d_update_m + 目前只能針對 detail 或 log 的 pk 是自增值的情況寫入 + build date : 2022/06/04 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2022-6-4 測試 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_relation_key VARCHAR(100); + DECLARE v_middle_field VARCHAR(100); + DECLARE v_dest_table VARCHAR(100); + DECLARE v_dest_field VARCHAR(100); + DECLARE v_dest_field2 VARCHAR(100); + DECLARE v_dest_field2_value VARCHAR(100); + DECLARE v_sql TEXT; + DECLARE v_para01 VARCHAR(100); + DECLARE v_para02 VARCHAR(100); + + -- get data + SELECT + RelationKey, MiddleField, para01, para02, + dest_table, dest_field, dest_field2, dest_field2_value + INTO + v_relation_key, v_middle_field, v_para01, v_para02, + v_dest_table, v_dest_field, v_dest_field2, v_dest_field2_value + FROM sys_transaction + WHERE tablename = p_tablename; + + -- build SQL + SET @sql = CONCAT( + 'SELECT MAX(', v_relation_key, ') INTO @v_max_id ', + 'FROM ', v_dest_table, + ' WHERE ', v_middle_field, ' = ''', v_para01, ''';', + 'SELECT ', v_dest_field, ', IFNULL(', v_dest_field2, ', ''''), ', v_middle_field, + ' INTO @v_field1, @v_field2, @v_field3 ', + 'FROM ', v_dest_table, + ' WHERE ', v_relation_key, ' = @v_max_id;' + ); + + IF v_dest_field2 IS NOT NULL AND v_dest_field2 <> '' THEN + SET @sql = CONCAT(@sql, + 'UPDATE ', p_tablename, + ' SET ', v_dest_field, ' = @v_field1, ', v_dest_field2, ' = @v_field2 ', + 'WHERE ', v_middle_field, ' = @v_field3;' + ); + ELSE + SET @sql = CONCAT(@sql, + 'UPDATE ', p_tablename, + ' SET ', v_dest_field, ' = @v_field1 ', + 'WHERE ', v_middle_field, ' = @v_field3;' + ); + END IF; + + -- exec SQL + PREPARE stmt FROM @sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; +END // + +DELIMITER ; \ No newline at end of file diff --git a/sys_d_update_m3.txt b/sys_d_update_m3.txt new file mode 100644 index 0000000..7f87da6 --- /dev/null +++ b/sys_d_update_m3.txt @@ -0,0 +1,83 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE sys_d_update_m3( + IN p_tablename VARCHAR(100) +) +/* + function : 配合 orm_api 的存檔後過帳, 當新增一筆 detail 後, update master 的合計欄位(目前先寫死 totalamount) + description: 目前先配合 omi_api 的存檔後機制(sys_transaction) 執行, 希望能全部透過設定, 而不是每一個 table 都必須客製 + build date : 2023/10/14 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2023-10-14 Init + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_relation_key VARCHAR(100); + DECLARE v_middle_field VARCHAR(100); + DECLARE v_dest_table VARCHAR(100); + DECLARE v_dest_field VARCHAR(100); + DECLARE v_dest_field2 VARCHAR(100); + DECLARE v_sql TEXT; + DECLARE v_para01 VARCHAR(100); + DECLARE v_para02 VARCHAR(100); + DECLARE v_pos INT; + DECLARE v_source_field VARCHAR(100); + DECLARE v_source_field2 VARCHAR(100); + + -- get data + SELECT + IFNULL(RelationKey,''), IFNULL(MiddleField,''), + IFNULL(para01,''), IFNULL(para02,''), + IFNULL(dest_table,''), IFNULL(dest_field,''), + IFNULL(dest_field2,'') + INTO + v_relation_key, v_middle_field, v_para01, v_para02, + v_dest_table, v_dest_field, v_dest_field2 + FROM sys_transaction + WHERE tablename = p_tablename; + + -- prepare sql + SET v_pos = LOCATE('=', v_dest_field); + IF v_pos > 0 THEN + SET v_source_field = SUBSTRING(v_dest_field, 1, v_pos-1); + SET v_dest_field = SUBSTRING(v_dest_field, v_pos+1); + END IF; + + SET v_pos = LOCATE('=', v_dest_field2); + IF v_pos > 0 THEN + SET v_source_field2 = SUBSTRING(v_dest_field2, 1, v_pos-1); + SET v_dest_field2 = SUBSTRING(v_dest_field2, v_pos+1); + END IF; + + -- build SQL + IF v_dest_field2 IS NULL OR v_dest_field2 = '' THEN + SET @sql = CONCAT( + 'UPDATE ', v_dest_table, ' d ', + 'JOIN (SELECT ', v_middle_field, ', ', v_source_field, + ' FROM ', p_tablename, + ' WHERE ', v_relation_key, ' = ''', v_para01, ''') s ', + 'ON d.', v_middle_field, ' = s.', v_middle_field, ' ', + 'SET d.', v_dest_field, ' = s.', v_source_field, ';' + ); + ELSE + SET @sql = CONCAT( + 'UPDATE ', v_dest_table, ' d ', + 'JOIN (SELECT ', v_middle_field, ', ', v_source_field, ', ', v_source_field2, + ' FROM ', p_tablename, + ' WHERE ', v_relation_key, ' = ''', v_para01, ''') s ', + 'ON d.', v_middle_field, ' = s.', v_middle_field, ' ', + 'SET d.', v_dest_field, ' = s.', v_source_field, + ', d.', v_dest_field2, ' = s.', v_source_field2, ';' + ); + END IF; + + -- exec SQL + PREPARE stmt FROM @sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; +END // + +DELIMITER ; \ No newline at end of file diff --git a/sys_dashboard.txt b/sys_dashboard.txt new file mode 100644 index 0000000..13a5da2 --- /dev/null +++ b/sys_dashboard.txt @@ -0,0 +1,69 @@ +DELIMITER // + +CREATE OR REPLACE PROCEDURE sys_dashboard( + IN p_token VARCHAR(100) +) +/* + Description: 取得首頁的幾個統計用數字 + 今日行事曆: + 待簽核表單: + 待辦事項: -- 協同工作單 + 執行中專案: -- 本 Sprint 未完成的 PBI + 未結案留言單: + Build Date : 2023/02/14 + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2023/02/14 Init + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + DECLARE v_userid VARCHAR(100); + DECLARE v_cnt1 INT DEFAULT 0; + DECLARE v_cnt2 INT DEFAULT 0; + DECLARE v_cnt3 INT DEFAULT 0; + DECLARE v_cnt4 INT DEFAULT 0; + DECLARE v_cnt5 INT DEFAULT 0; + + -- 將 token 換成 userid + SELECT userid INTO v_userid FROM sys_users WHERE token = p_token LIMIT 1; + + -- 今日行事曆(參考 sp=eip_getCalendar) + SELECT COUNT(*) INTO v_cnt1 + FROM eip_core_calendar + WHERE DATE(start_time) = CURDATE() AND personid = v_userid; + + -- 待簽核表單(參考 sp=bpm_sign_todo) + SELECT COUNT(*) INTO v_cnt2 + FROM bpm_flow_sign a + JOIN bpm_list b ON a.flow_id = b.flow_id + JOIN basperson p ON a.signerid = p.personid + WHERE a.sign_status = 'P' + AND IFNULL(a.assign_to,'') = 'Y' + AND a.signerid = v_userid; + + -- 待辦事項(建議是前後3天) + SELECT COUNT(*) INTO v_cnt3 + FROM crmassign_m m + WHERE DATE(m.predictdate) BETWEEN DATE_SUB(CURDATE(), INTERVAL 3 DAY) AND DATE_ADD(CURDATE(), INTERVAL 3 DAY) + AND (m.personid2 = v_userid OR m.personid3 = v_userid); + + -- 執行中 PBI(本 sprint 尚未完成, ) + SELECT COUNT(*) INTO v_cnt4 + FROM pms_pbi p + JOIN pms_sprint s ON p.sprintid = s.sprintid + WHERE DATE(p.startdate) BETWEEN DATE_SUB(CURDATE(), INTERVAL 3 DAY) AND DATE_ADD(CURDATE(), INTERVAL 3 DAY) + AND CURDATE() BETWEEN DATE(s.sprint_startdate) AND DATE(s.sprint_enddate) + AND (p.controller = v_userid OR p.tester = v_userid); + + -- 未結案留言單(規格要調整, 先暫緩) + + -- 回傳 dataset + SELECT 0 AS code, 'ok' AS msg; + SELECT v_cnt1 AS dashboard1, v_cnt2 AS dashboard2, + v_cnt3 AS dashboard3, v_cnt4 AS dashboard4, + v_cnt5 AS dashboard5; +END // + +DELIMITER ; \ No newline at end of file diff --git a/sys_issue2pbi.txt b/sys_issue2pbi.txt new file mode 100644 index 0000000..9b28302 --- /dev/null +++ b/sys_issue2pbi.txt @@ -0,0 +1,40 @@ +DELIMITER // +CREATE OR REPLACE PROCEDURE sys_issue2pbi( + IN p_issueid INT +) +/* + Function : 將 issue copy 到 PBI(在 issue 中 button call) + Description: + Build Date : 2022/07/09 + + Modify History + Item Who Date Modify Docs + ==== ========== ========== ================================================ + 1 Michael 2022/07/09 Init + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + /* + Function: Copy issue to PBI (called from issue button) + Build Date: 2022/07/09 + */ + DECLARE v_count SMALLINT; + + SELECT COUNT(*) INTO v_count FROM pms_pbi WHERE source_id = p_issueid; + + IF v_count = 0 THEN + -- Insert into pms_pbi + INSERT INTO pms_pbi (sprintid, projectid, functioncode, pbi_title, pbi_desc, owner, pbi_type, pbi_status, source_id, attach_file) + SELECT + 'Pre-Sprint', projectid, functioncode, CONCAT('copy from issue', issueid), issue_description, + raised_by, 'Issue', 1, issueid, issue_extdoc + FROM pms_issuelog + WHERE issueid = p_issueid; + + -- Return success + SELECT 0 AS code, 'ok' AS msg; + ELSE + SELECT 9 AS code, '該序號 issue 已轉移，請確認後再重新執行?!' AS msg; + END IF; +END // +DELIMITER ; \ No newline at end of file diff --git a/sys_m_update_m.txt b/sys_m_update_m.txt new file mode 100644 index 0000000..2496326 --- /dev/null +++ b/sys_m_update_m.txt @@ -0,0 +1,82 @@ +DELIMITER // +CREATE OR REPLACE PROCEDURE sys_m_update_m( + IN p_para_tablename VARCHAR(100) +) +/* + function : 配合 orm_api 的存檔後過帳, 當表頭存檔時, update master 的合計欄位(目前先寫死 totalamount) + description: 目前先配合 omi_api 的存檔後機制(sys_transaction) 執行, 希望能全部透過設定, 而不是每一個 table 都必須客製 + build date : 2023/10/17 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2023-10-17 Init + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + /* + Function: Update master table totals after detail table changes + Build Date: 2023/10/17 + */ + DECLARE v_RelationKey VARCHAR(100); + DECLARE v_MiddleField VARCHAR(100); + DECLARE v_dest_table VARCHAR(100); + DECLARE v_dest_field VARCHAR(100); + DECLARE v_dest_field2 VARCHAR(100); + DECLARE v_detail_tbl_name VARCHAR(100); + DECLARE v_sql LONGTEXT; + DECLARE v_para01 VARCHAR(100); + DECLARE v_para02 VARCHAR(100); + DECLARE v_pos INT; + DECLARE v_source_field VARCHAR(100); + DECLARE v_source_field2 VARCHAR(100); + + -- Read parameters from sys_transaction + SELECT + IFNULL(RelationKey, ''), IFNULL(MiddleField, ''), IFNULL(para01, ''), IFNULL(para02, ''), + IFNULL(dest_table, ''), IFNULL(dest_field, ''), IFNULL(dest_field2, ''), IFNULL(dest_field2_value, '') + INTO + v_RelationKey, v_MiddleField, v_para01, v_para02, + v_dest_table, v_dest_field, v_dest_field2, v_detail_tbl_name + FROM sys_transaction WHERE tablename = p_para_tablename; + + -- Debug + IF v_para01 = '' THEN + SET v_para01 = '231007-001'; + END IF; + + -- Check for equals sign to split fields (sum(subamount)=totalamount) + SET v_pos = LOCATE('=', v_dest_field); + IF v_pos > 0 THEN + SET v_source_field = SUBSTRING(v_dest_field, 1, v_pos - 1); + SET v_dest_field = SUBSTRING(v_dest_field, v_pos + 1); + END IF; + + SET v_pos = LOCATE('=', v_dest_field2); + IF v_pos > 0 THEN + SET v_source_field2 = SUBSTRING(v_dest_field2, 1, v_pos - 1); + SET v_dest_field2 = SUBSTRING(v_dest_field2, v_pos + 1); + END IF; + + IF v_dest_field2 = '' THEN + SET v_sql = CONCAT( + 'UPDATE ', v_dest_table, ' SET ', v_dest_field, ' = (SELECT ', v_source_field, + ' FROM ', v_detail_tbl_name, ' WHERE ', v_RelationKey, ' = ''', v_para01, ''') ', + 'WHERE ', v_MiddleField, ' = ''', v_para01, ''';' + ); + ELSE + SET v_sql = CONCAT( + 'UPDATE ', v_dest_table, ' SET ', v_dest_field, ' = (SELECT ', v_source_field, + ' FROM ', v_detail_tbl_name, ' WHERE ', v_RelationKey, ' = ''', v_para01, '''), ', + v_dest_field2, ' = (SELECT ', v_source_field2, + ' FROM ', v_detail_tbl_name, ' WHERE ', v_RelationKey, ' = ''', v_para01, ''') ', + 'WHERE ', v_MiddleField, ' = ''', v_para01, ''';' + ); + END IF; + + SET @sql = v_sql; + PREPARE stmt FROM @sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; +END // +DELIMITER ; \ No newline at end of file diff --git a/sys_m_update_trans.txt b/sys_m_update_trans.txt new file mode 100644 index 0000000..78c803a --- /dev/null +++ b/sys_m_update_trans.txt @@ -0,0 +1,66 @@ +DELIMITER // +CREATE OR REPLACE PROCEDURE sys_m_update_trans( + IN p_para_tablename VARCHAR(100) +) +BEGIN + /* + function : 配合 orm_api 的存檔後過帳, 當新增(或修改)一筆 data 後, update master 的某1-2 個同名欄位的值 + description: 目前先配合 omi_api 的存檔後機制(sys_transaction) 執行, 希望能全部透過設定, 而不是每一個 table 都必須客製 + copy from sys_transfer_comm + 目前針對某 table 存檔後, update 另一個 table 的情況寫入 + build date : 2022/06/04 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2022-6-4 測試 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) + */ + DECLARE v_RelationKey VARCHAR(100); -- RelationKey + DECLARE v_MiddleField VARCHAR(100); -- MiddleField + DECLARE v_dest_table VARCHAR(100); -- dest_table + DECLARE v_dest_field VARCHAR(100); -- dest_field + DECLARE v_dest_field2 VARCHAR(100); -- dest_field2(特殊使用, 如sys_rolemenusecurity.controlname=read) + DECLARE v_dest_field2_value VARCHAR(100); -- dest_field2_value(特殊使用, 如sys_rolemenusecurity.controlname=read) + DECLARE v_sql LONGTEXT; + DECLARE v_para01 VARCHAR(100); + DECLARE v_para02 VARCHAR(100); + + /* + read paras from sys_transaction + RelationKey = d 檔的 pk + MiddleField = md 檔的關聯 key + */ + SELECT + RelationKey, MiddleField, para01, para02, + dest_table, dest_field, dest_field2, dest_field2_value + INTO + v_RelationKey, v_MiddleField, v_para01, v_para02, + v_dest_table, v_dest_field, v_dest_field2, v_dest_field2_value + FROM sys_transaction WHERE tablename = p_para_tablename; + + -- 建立動態 SQL + IF v_dest_field2 IS NOT NULL AND v_dest_field2 != '' THEN + SET v_sql = CONCAT( + 'UPDATE ', v_dest_table, ' SET ', + v_dest_field, ' = (SELECT ', v_dest_field, ' FROM ', p_para_tablename, + ' WHERE ', v_MiddleField, ' = ''', v_para01, '''), ', + v_dest_field2, ' = (SELECT ', v_dest_field2, ' FROM ', p_para_tablename, + ' WHERE ', v_MiddleField, ' = ''', v_para01, ''') ', + 'WHERE ', v_MiddleField, ' = ''', v_para01, ''';' + ); + ELSE + SET v_sql = CONCAT( + 'UPDATE ', v_dest_table, ' SET ', + v_dest_field, ' = (SELECT ', v_dest_field, ' FROM ', p_para_tablename, + ' WHERE ', v_MiddleField, ' = ''', v_para01, ''') ', + 'WHERE ', v_MiddleField, ' = ''', v_para01, ''';' + ); + END IF; + + SET @sql = v_sql; + PREPARE stmt FROM @sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; +END // +DELIMITER ; \ No newline at end of file diff --git a/sys_next_no.txt b/sys_next_no.txt new file mode 100644 index 0000000..b979ee0 --- /dev/null +++ b/sys_next_no.txt @@ -0,0 +1,49 @@ +DELIMITER // +CREATE OR REPLACE FUNCTION sys_next_no( + p_billno_max VARCHAR(20) +) +RETURNS VARCHAR(20) +DETERMINISTIC +BEGIN + DECLARE v_billno VARCHAR(20); + DECLARE v_code1 VARCHAR(10); + DECLARE v_code2 VARCHAR(10); + DECLARE v_code3 INT; + + SET v_billno = p_billno_max; + + IF IFNULL(v_billno, '') = '' THEN + SET v_billno = CONCAT(DATE_FORMAT(CURDATE(), '%y%m%d'), '-001'); + ELSE + -- Check last 3 digits + IF REGEXP_SUBSTR(v_billno, '[0-9]{3}$') IS NOT NULL THEN + SET v_code1 = RIGHT(v_billno, 3); + SET v_code3 = CAST(v_code1 AS UNSIGNED) + 1; + + IF v_code3 < 10 THEN + SET v_code2 = CONCAT('00', v_code3); + ELSEIF v_code3 < 100 THEN + SET v_code2 = CONCAT('0', v_code3); + ELSE + SET v_code2 = CAST(v_code3 AS CHAR); + END IF; + + SET v_billno = CONCAT(LEFT(v_billno, LENGTH(v_billno) - 3), v_code2); + -- Check last 2 digits + ELSEIF REGEXP_SUBSTR(v_billno, '[0-9]{2}$') IS NOT NULL THEN + SET v_code1 = RIGHT(v_billno, 2); + SET v_code3 = CAST(v_code1 AS UNSIGNED) + 1; + + IF v_code3 < 10 THEN + SET v_code2 = CONCAT('0', v_code3); + ELSE + SET v_code2 = CAST(v_code3 AS CHAR); + END IF; + + SET v_billno = CONCAT(LEFT(v_billno, LENGTH(v_billno) - 2), v_code2); + END IF; + END IF; + + RETURN v_billno; +END // +DELIMITER ; \ No newline at end of file diff --git a/sys_transfer_comm.txt b/sys_transfer_comm.txt new file mode 100644 index 0000000..f3f8aaa --- /dev/null +++ b/sys_transfer_comm.txt @@ -0,0 +1,71 @@ +DELIMITER // +CREATE OR REPLACE PROCEDURE sys_transfer_comm( + IN p_para_tablename VARCHAR(100) +) +/* + function : 配合 amis 的 transfer 元件, 將暫存在 owned(or else) 欄位的值, 寫到指定的 table(透過設定) + description: 目前先配合 omi_api 的存檔後機制(sys_transaction) 執行, 希望能全部透過設定, 而不是每一個 table 都必須客製 + copy from sys_transfer_owned2rolemenusecurity + build date : 2022/04/08 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2022-4-9 測試 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + /* + Function: Transfer data from temporary fields to specified tables + Build Date: 2022/04/08 + */ + DECLARE v_RelationKey VARCHAR(100); + DECLARE v_MiddleField VARCHAR(100); + DECLARE v_dest_table VARCHAR(100); + DECLARE v_dest_field VARCHAR(100); + DECLARE v_dest_field2 VARCHAR(100); + DECLARE v_dest_field2_value VARCHAR(100); + DECLARE v_sql LONGTEXT; + DECLARE v_para01 VARCHAR(100); + DECLARE v_para02 VARCHAR(100); + + -- Read parameters from sys_transaction + SELECT + RelationKey, MiddleField, para01, para02, + dest_table, dest_field, dest_field2, dest_field2_value + INTO + v_RelationKey, v_MiddleField, v_para01, v_para02, + v_dest_table, v_dest_field, v_dest_field2, v_dest_field2_value + FROM sys_transaction WHERE tablename = p_para_tablename; + + -- Build dynamic SQL + SET v_sql = CONCAT( + 'DELETE FROM ', v_dest_table, ' WHERE ', v_RelationKey, ' = ''', v_para01, ''';' + ); + + IF v_dest_field2 IS NOT NULL AND v_dest_field2 != '' THEN + SET v_sql = CONCAT(v_sql, + ' INSERT INTO ', v_dest_table, ' (', v_RelationKey, ',', v_dest_field, ',', v_dest_field2, ') ', + 'SELECT t.', v_RelationKey, ', s.col, ''', v_dest_field2_value, ''' ', + 'FROM ', p_para_tablename, ' t ', + 'JOIN (SELECT col FROM STRING_SPLIT((SELECT ', v_MiddleField, ' FROM ', p_para_tablename, + ' WHERE ', v_RelationKey, ' = ''', v_para01, '''), '','') WHERE col != '''') s ', + 'WHERE t.', v_RelationKey, ' = ''', v_para01, ''';' + ); + ELSE + SET v_sql = CONCAT(v_sql, + ' INSERT INTO ', v_dest_table, ' (', v_RelationKey, ',', v_dest_field, ') ', + 'SELECT t.', v_RelationKey, ', s.col ', + 'FROM ', p_para_tablename, ' t ', + 'JOIN (SELECT col FROM STRING_SPLIT((SELECT ', v_MiddleField, ' FROM ', p_para_tablename, + ' WHERE ', v_RelationKey, ' = ''', v_para01, '''), '','') WHERE col != '''') s ', + 'WHERE t.', v_RelationKey, ' = ''', v_para01, ''';' + ); + END IF; + + SET @sql = v_sql; + PREPARE stmt FROM @sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; +END // +DELIMITER ; \ No newline at end of file diff --git a/sys_transfer_owned2rolemenusecurity.txt b/sys_transfer_owned2rolemenusecurity.txt new file mode 100644 index 0000000..c07059a --- /dev/null +++ b/sys_transfer_owned2rolemenusecurity.txt @@ -0,0 +1,55 @@ +DELIMITER // +CREATE PROCEDURE sys_transfer_owned2rolemenusecurity( + IN p_para_menuid VARCHAR(100) +) +/* + function : 配合 amis 的 transfer 元件, 將暫存在 owned 欄位的值, 寫到 rolemenusecurity + description: 目前先配合 omi_api 的存檔後機制(sys_transaction) 執行 + build date : 2021/10/22 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2021-10-17 新增 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) +*/ +BEGIN + /* + Function: Transfer ownership data from menu table to role menu security + Build Date: 2021/10/22 + */ + DECLARE v_done INT DEFAULT FALSE; + DECLARE v_menuid VARCHAR(100); + DECLARE v_owned TEXT; + + DECLARE cur CURSOR FOR + SELECT menuid, owned FROM sys_menutable WHERE menuid = p_para_menuid; + DECLARE CONTINUE HANDLER FOR NOT FOUND SET v_done = TRUE; + + OPEN cur; + + read_loop: LOOP + FETCH cur INTO v_menuid, v_owned; + IF v_done THEN + LEAVE read_loop; + END IF; + + -- Delete existing records + DELETE FROM sys_rolemenusecurity WHERE menuid = v_menuid; + + -- Insert new records from comma-separated list + SET @sql = CONCAT( + 'INSERT INTO sys_rolemenusecurity (menuid, roleid, controlname) ', + 'SELECT ''', v_menuid, ''', value, ''read'' ', + 'FROM STRING_SPLIT(''', IFNULL(v_owned, ''), ''', '','') ', + 'WHERE value != '''';' + ); + + PREPARE stmt FROM @sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; + END LOOP; + + CLOSE cur; +END // +DELIMITER ; \ No newline at end of file diff --git a/sys_transfer_owned2userroles.txt b/sys_transfer_owned2userroles.txt new file mode 100644 index 0000000..510394b --- /dev/null +++ b/sys_transfer_owned2userroles.txt @@ -0,0 +1,39 @@ +DELIMITER // +CREATE OR REPLACE PROCEDURE sys_transfer_owned2userroles( + IN p_para_roleid VARCHAR(100) +) +BEGIN + /* + function : 配合 amis 的 transfer 元件, 將暫存在 owned 欄位的值, 寫到 userroles + description: 目前先配合 omi_api 的存檔後機制(sys_transaction) 執行 + build date : 2021/10/22 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2021-10-17 新增 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) + */ + DECLARE v_owned TEXT; + + -- 取得 owned 欄位值 + SELECT owned INTO v_owned FROM sys_roles WHERE roleid = p_para_roleid; + + -- 先刪除現有記錄 + DELETE FROM sys_userroles WHERE roleid = p_para_roleid; + + -- 使用 STRING_SPLIT 函數插入新記錄 + IF v_owned IS NOT NULL AND v_owned != '' THEN + SET @sql = CONCAT( + 'INSERT INTO sys_userroles (roleid, userid) ', + 'SELECT ''', p_para_roleid, ''', value ', + 'FROM STRING_SPLIT(''', v_owned, ''', '','') ', + 'WHERE value != '''';' + ); + + PREPARE stmt FROM @sql; + EXECUTE stmt; + DEALLOCATE PREPARE stmt; + END IF; +END // +DELIMITER ; \ No newline at end of file diff --git a/sys_transfer_rolemenusecurity2owned.txt b/sys_transfer_rolemenusecurity2owned.txt new file mode 100644 index 0000000..84b8d18 --- /dev/null +++ b/sys_transfer_rolemenusecurity2owned.txt @@ -0,0 +1,42 @@ +DELIMITER // +CREATE OR REPLACE PROCEDURE sys_transfer_rolemenusecurity2owned() +BEGIN + /* + function : 配合 amis 的 transfer 元件, 將 rolemenusecurity 寫入暫存在 owned 欄位 + description: 本程式基本上只會很低頻率的使用, 因為程式的 SOP 是由 owned -> rolemenusecurity + 不會逆向執行 + build date : 2021/10/22 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2021-10-17 新增 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) + */ + DECLARE v_done INT DEFAULT FALSE; + DECLARE v_menuid VARCHAR(100); + DECLARE v_roleids TEXT; + + -- 宣告游標，按 menuid 分組取得所有 roleid + DECLARE cur CURSOR FOR + SELECT menuid, GROUP_CONCAT(roleid SEPARATOR ',') + FROM sys_rolemenusecurity + GROUP BY menuid; + + DECLARE CONTINUE HANDLER FOR NOT FOUND SET v_done = TRUE; + + OPEN cur; + + read_loop: LOOP + FETCH cur INTO v_menuid, v_roleids; + IF v_done THEN + LEAVE read_loop; + END IF; + + -- 更新 owned 欄位 + UPDATE sys_menutable SET owned = v_roleids WHERE menuid = v_menuid; + END LOOP; + + CLOSE cur; +END // +DELIMITER ; \ No newline at end of file diff --git a/sys_transfer_userroles2owned.txt b/sys_transfer_userroles2owned.txt new file mode 100644 index 0000000..152d014 --- /dev/null +++ b/sys_transfer_userroles2owned.txt @@ -0,0 +1,42 @@ +DELIMITER // +CREATE OR REPLACE PROCEDURE sys_transfer_userroles2owned() +BEGIN + /* + function : 配合 amis 的 transfer 元件, 將userroles 寫入暫存在 owned 欄位 + description: 本程式基本上只會很低頻率的使用, 因為程式的 SOP 是由 owned -> userrole + 不會逆向執行 + build date : 2021/10/22 + + modify history + item who date modify docs + ==== ========== ========== ================================================ + 1 michael 2021-10-17 新增 + 2 Michael 2025/07/20 改寫為 MariaDB 並最佳化(ChatGPT+DeepSeek) + */ + DECLARE v_done INT DEFAULT FALSE; + DECLARE v_roleid VARCHAR(100); + DECLARE v_userids TEXT; + + -- 宣告游標，按 roleid 分組取得所有 userid + DECLARE cur CURSOR FOR + SELECT roleid, GROUP_CONCAT(userid SEPARATOR ',') + FROM sys_userroles + GROUP BY roleid; + + DECLARE CONTINUE HANDLER FOR NOT FOUND SET v_done = TRUE; + + OPEN cur; + + read_loop: LOOP + FETCH cur INTO v_roleid, v_userids; + IF v_done THEN + LEAVE read_loop; + END IF; + + -- 更新 owned 欄位 + UPDATE sys_roles SET owned = v_userids WHERE roleid = v_roleid; + END LOOP; + + CLOSE cur; +END // +DELIMITER ; \ No newline at end of file